KEHIPI MT3608 Type-C Boost Converter 2A 10 pcs
A pack of ten MT3608 boost modules with Type-C input steps 2 V to 24 V up to 5 V–28 V at up to 2 A and 93 % efficiency
- Product color10 PCS Type-C
- 10-piece pack simplifies bulk DIY projects
- Type-C input enables convenient USB power sourcing
- Adjustable 5 V–28 V output suits varied voltage needs
- Up to 2 A peak current drives demanding loads
- Over 93 % efficiency reduces heat and waste
Compact boost modules for DIY power projects
This pack supplies ten MT3608 step-up converters, each fitted with a USB Type-C input connector. Makers and hobbyists can use them to raise a low-voltage source to the level required by a microcontroller, sensor board or small actuator.
Input limited to 24 V and output must exceed input
The modules accept 2 V to 24 V at the Type-C port and can deliver 5 V to 28 V at up to 2 A with 93 % efficiency. Because the topology is boost-only, the output voltage always has to be higher than whatever is supplied at the input.
Verify your source stays below 24 V
Before ordering, confirm that your power source never exceeds 24 V and that it can provide the necessary input current for the desired output load. The on-board potentiometer sets the output voltage, so have a multimeter ready to dial in the exact value your project needs.
How it compares
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
- Price $26.99
- Pricier than about 56% of the 3,875 comparable items (median $23.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | AITRIP |
| Model name | MT3608 |
| Part number | 1045A |
| Product color | 10 PCS Type-C |
Questions about this item
Should I buy the 10-piece pack or look for a smaller quantity?
The listing supplies exactly ten MT3608 modules with Type-C connectors in one package; no smaller pack is offered in these facts.
What does the 2 A maximum output current mean when I power a project?
You can draw up to 2 A continuously from the boost converter, provided the input supply can deliver the corresponding power and the output voltage stays above the input voltage.
How does the 2 V–24 V input range limit what I can connect to the Type-C port?
The module accepts any DC source between 2 V and 24 V on the Type-C input, but it will only boost to a higher voltage — it cannot step down or pass through a voltage lower than the output setting.
More in AC Adapters & Power Bricks
Similar items
No Sew 19V 3.42A 65W power adapter 5.5mm x 2.5mm 10-in-1 connectors
- USB C Charger
- 9 V





