KEHIPI TP4056 Type-C USB 5V 1A 18650 Lithium Battery Charger Module 20pcs
Pack of 20 TP4056 charging modules with USB-C input, 1 A charge current, 4.2 V cut-off and 3 A over-current protection for 18650 cells
- Product colorTP4056 Type-C USB 20PCS
- Charge via Type-C USB with a standard phone charger
- 1 A maximum output current suits single 18650 cells
- Dual protection: over-charge at 4.2 V and over-current at 3 A
- Compact 2.6 × 1.7 cm board fits tight DIY enclosures
- 20 modules in one pack for multi-cell projects
Pack of 20 charger modules
The KEHIPI TP4056 boards come in a 20-piece pack for makers who need multiple single-cell lithium charging circuits. Each module accepts 5 V through a Type-C USB socket and charges one 18650 cell at up to 1 A. The compact 2.6 cm by 1.7 cm footprint fits tight project enclosures.
Dual protection functions
Over-charge protection stops the charge at 4.2 V ± 1 % while over-current protection trips at 3 A, guarding the cell and the board. A red LED shows active charging and a green LED signals a full cell; with no load the LED stays off. Input voltage solder pads remain available for permanent wiring.
Single-cell headroom
The board comfortably handles one 18650 from 3.2 V discharge cut-off up to the 4.2 V termination point at a steady 1 A rate. It cannot charge multiple cells in series or parallel, and the 1 A limit makes it unsuitable for high-capacity packs that need faster replenishment.
How it compares
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
- Price $40.99
- Pricier than about 74% of the 3,875 comparable items (median $23.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | AITRIP |
| Model name | TP4056 Type-c USB |
| Part number | EC16958 |
| Product color | TP4056 Type-C USB 20PCS |
Questions about this item
Will the board itself need replacement after many charge cycles, or only the 18650 cells?
The TP4056 board has no consumable parts listed; only the 18650 lithium cells wear out and need replacing over time.
What stops the charging current first when the module runs continuously at 1000 mA?
The built-in over-current protection trips at 3 A, so the 1 A charge rate is the practical limit during sustained use.
How much heat does each board produce when charging all day from a 5 V Type-C source?
At 1 A and 5 V input the dissipation is modest; the 2.6 × 1.7 cm board runs warm but not hot during continuous operation.
More in AC Adapters & Power Bricks





