We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular 2.5 inch SATA SSD with smooth matte finish and silver label

KingSpec

KingSpec P3-1TB-FB 1TB 2.5" SATA III internal SSD

SKU CH-VR1M-Z600K

A 2.5-inch SATA III internal SSD with 1TB of 3D NAND storage delivering up to 560MB/s reads and 530MB/s writes for faster boot and load times

  • Total capacity1 TB
  • Sequential read speedUp to 560 MB/s
  • Sequential write speedUp to 530 MB/s
  • Interface typeSATA III
  • Form factor2.5 in (6.35 cm)
  • Product typeInternal Solid State Drive (SSD)

Model P3-1TB-Soccer

  • Sequential read reaches 560 MB/s for fast boot and load times
  • Sequential write up to 530 MB/s speeds up file saves and installs
  • Random read 40,000 IOPS and random write 64,000 IOPS keep multitasking responsive
  • 480 TBW endurance rating supports heavy daily workloads over years
  • Idle power draw of 0.25 W extends laptop battery life

P3-FB Series 1TB SATA III SSD

The KingSpec P3-1TB-FB is a 2.5 inch internal solid state drive built for consumer laptops and desktops. It uses 3D NAND flash and a SATA III 6Gbps interface to deliver sequential reads up to 560 MBps and writes up to 530 MBps.

Silent operation and low power draw

With no moving parts the drive runs completely silent in normal use. Idle power consumption is rated at 0.25W, helping to extend battery life on portable systems while keeping desktop power draw minimal.

Firmware features protect data and extend life

Native Command Queuing, TRIM, S.M.A.R.T., wear levelling, garbage collection and over-provisioning work together to maintain consistent performance. The drive is rated for 480TB written and a 1,000,000 hour MTBF.

How it compares

Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.

Price $98.99
Cheaper than about 73% of the 1,994 comparable items (median $180.49).
Total capacity 1 TB
Typical for this category: the median of 1,368 items is 1 TB.
Sequential read speed Up to 560 MB/s
Lower than about 60% of the 1,180 comparable items (median 2,400 MB/s).
Price per TB $98.99 per TB
Cheaper than about 85% of the 1,362 comparable items (median $165.50 per TB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameKingSpec
Product lineP3-FB Series
Model nameP3-1 TB-FB
Part numberP3-1 TB-FB
Total capacity1 TB
Product typeInternal Solid State Drive (SSD)
Intended useConsumer
Performance
Sequential read speedUp to 560 MB/s
Sequential write speedUp to 530 MB/s
Random read (4K)Up to 40,000 IOPS
Random write (4K)Up to 64,000 IOPS
Storage
NAND flash type3D NAND
Write endurance480 TB
Connectivity
Connection protocolSATA
Ports & slots
Interface typeSATA III
Power
Idle power draw0.25 W
Active power draw1.85 W
Size & build
Form factor2.5 in (6.35 cm)
Heat sinkWithout HeatSink
Overall height7 mm
Overall width70 mm
Product depth100.4 mm
Product weight50g
Environment & compliance
Operating temperature range0 °C to 70 °C
Storage temperature range-20 °C to 75 °C
Operating humidity range5-95%
More details
Mean time between failures1,000,000 h

Other versions of this model

5 more in the same range

Questions about this item

How do I install the 2.5" SATA drive and which step is often missed?

Connect the drive to a SATA data cable and a SATA power connector, then enable AHCI mode in the BIOS before cloning or installing the OS; skipping AHCI leaves the drive running in legacy IDE mode.

What maintenance will the 1TB 3D NAND SSD need over its 480 TBW rated life?

No user maintenance is required; the controller handles wear leveling, garbage collection, over-provisioning and TRIM automatically, while S.M.A.R.T. attributes report health until the 480 TBW limit is approached.

At what point does sustained write performance hit its ceiling on this SATA III drive?

Sequential writes top out at 530 MBps and random writes at 64,000 IOPS; once the SLC cache fills during heavy sustained writes, speeds will throttle to the native TLC NAND rate.

More in Internal NVMe & SATA SSDs

Similar items