XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
2.5-inch 2TB SATA internal SSD with 3D TLC memory, 2GB DRAM cache, up to 550 MBps read and 520 MBps write speeds, rated for enterprise use
The Kingston SKC600/2048G is a 2TB internal solid state drive built for enterprise workloads. It uses a 2.5 inch form factor with a SATA III interface and 3D TLC memory components. A SM2259 controller and 2GB DRAM cache support the rated performance figures.
This drive fits systems with a 2.5 inch SATA bay that can use up to 550 MBps sequential read and 520 MBps sequential write. Random performance reaches 90,000 IOPS read and 80,000 IOPS write. Environments requiring PCIe bandwidth or a different physical connector should select another part.
The drive connects through a standard SATA III link, so the host must provide a matching SATA port and 2.5 inch mounting space. Sequential and random speeds, MTBF of 1,000,000 hours, and 20G vibration resistance are all specified for this interface.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Kingston |
| Model name | SKC600/2048G |
| Total capacity | 2 TB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Enterprise |
| Performance | |
| Sequential read speed | Up to 550 MB/s |
| Sequential write speed | Up to 520 MB/s |
| Random read (4K) | Up to 90,000 IOPS |
| Random write (4K) | Up to 80,000 IOPS |
| Storage | |
| NAND flash type | 3D TLC |
| Controller chip | SM2259 |
| Cache memory | 2 GB DRAM |
| Connectivity | |
| Connection protocol | SATA |
| Ports & slots | |
| Interface type | SATA III |
| Power | |
| Idle power draw | 0.06 W Idle |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Overall height | 7 mm |
| Overall width | 100.1 mm |
| Product depth | 69.85 mm |
| Product weight | 40g |
| Shipping weight | 0.91 kg |
| Package size | 178 × 127 × 76 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -40 °C to 85 °C |
| Vibration tolerance | 20G Peak (10-2000 Hz) |
| More details | |
| Mean time between failures | 1,000,000 h |
Yes, the drive is 7.00mm high, matching the common 7mm laptop bay specification.
No, it draws power from the standard SATA power connector; idle consumption is 0.06W.
Yes, the SATA III interface and 2TB capacity are fully supported as a boot device by modern operating systems.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?