Yamaha SR-C30ABL 2.1 sound bar with wireless subwoofer
- System
- SoundBar
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Six in-ceiling speakers with 6.5" Kevlar/Fiberglass woofers, 1" silk dome tweeters, 50Hz-20KHz response, 89dB sensitivity and 50-175W power handling
This bundle supplies six KLH M-8602-C in-ceiling speakers for whole-home audio distribution. Each unit uses a two-way sealed steel enclosure with a 6.5" Kevlar/Fiberglass woofer and a 1" Silk Dome tweeter. The 8-ohm nominal impedance suits standard stereo and multi-zone amplifiers. Buyers needing wireless streaming or powered zones must add separate components.
Four mounting dog tabs per speaker secure the 7.2 lb enclosure into ceilings with an 8.75" mounting depth. The sealed, tuned metal cabinet reduces vibration transfer to building materials. Phoenix Connector inputs accept bare wire without soldering, speeding multi-room cable pulls. Installers without access above the ceiling plane will find the depth requirement restrictive.
The 50W to 175W recommended power window and 89dB sensitivity define the usable amplifier headroom. Frequency response spans 50Hz to 20kHz, so deep sub-bass extension is not available without a separate subwoofer. The 10.375" diameter trim sets the visible ceiling cutout size. Systems requiring higher SPL or lower impedance loads need different speakers.
Measured against everything we stock in Soundbar Speaker Systems, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Product type | Indoor/Outdoor Speakers |
The speakers accept a recommended power range of 50W to 175W, so any amplifier rated within that window will drive them cleanly without risk of damage.
Each speaker requires a mounting depth of 8.75 inches and fits a cut-out sized for its 10.375-inch frame; allow that clearance above the ceiling before installing.
Strip each conductor, insert into the labelled Phoenix Connector slots, and tighten the screws; the common error is reversing polarity, so match positive to positive and negative to negative at both the speaker and the amplifier.
More in Soundbar Speaker Systems
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?