We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Roll of white scrim-reinforced vinyl banner material

Kodak

Kodak Water-Resistant Scrim Banner 60" x 40' paper

SKU CH-F3YA-MPFKY

A 16-mil scrim-reinforced vinyl banner roll, 60 inches by 40 feet, with a water-resistant surface for indoor or outdoor signage

  • Vibrant, high-resolution graphics from water-resistant surface
  • 16-mil scrim-reinforced vinyl resists scratches and water
  • Compatible with thermal and piezo wide-format printers
  • 60 in x 40 ft roll maximises large-scale visibility
  • White point and durability extend graphic life outdoors

Wide-Format Banner Media

The Kodak Water-Resistant Scrim Banner is a 16-mil vinyl roll reinforced with scrim for wide-format printing. It suits sign shops and print providers producing large indoor or outdoor graphics that must resist moisture and handling wear. The bright white point delivers sharp, high-resolution output on compatible thermal or piezo printers.

Upgrade from Unreinforced Substrates

Standard banner papers without scrim reinforcement tear more easily and absorb water, limiting outdoor life. This roll replaces those materials when a job calls for scratch resistance, water resistance and easier handling during high-volume production runs. The jump is worthwhile whenever graphics must survive weather or repeated mounting cycles.

60-Inch by 40-Foot Roll Capacity

The 152.4 cm by 12.19 m dimensions cover full-width banners, building wraps and long-run promotional displays in a single piece. It comfortably handles extended print runs without splice lines. The roll runs out when a project exceeds 40 feet in length or requires a width greater than 60 inches.

How it compares

Measured against everything we stock in Copy & Printer Paper, at today’s prices. Recalculated every night.

Price $276.99
Pricier than about 90% of the 3,634 comparable items (median $27.99).

Specifications

No published specifications for this item yet.

Questions about this item

What printer width and roll diameter does the 60 in x 40 ft roll require?

The roll is 60 inches (152.4 cm) wide and 40 feet (12.19 m) long; your wide-format printer must accept a 60-inch roll and have enough spindle clearance for the 16-mil thickness.

How do I load the banner so the printable side faces the printheads?

Unroll a short length, confirm the whiter, coated side is up, then feed it into the printer with that side toward the printheads; loading it backwards puts ink on the scrim-reinforced back.

How often should I replace the roll when printing high-volume outdoor banners?

One 40-foot roll yields roughly 40 square feet per linear foot; track linear usage in your RIP software and swap rolls when the remaining length drops below your next job size.

More in Copy & Printer Paper

Similar items