Kramer Electronics C-BM/BM RG-6 BNC Male/Male Coaxial RF Cable 30.5m 75Ohm
30.5 m RG-6 coaxial cable with male BNC connectors at both ends, 75 Ohm impedance, rated for SD up to 259 m and HD-SDI up to 344 m
- 5 m length suits large installations
- Male BNC connectors at both ends for direct device links
- RG-6 construction with 75 Ohm impedance matches video standards
- Supports SD signals up to 259 m and HD-SDI up to 344 m
- Flexible black jacket eases routing in professional setups
Video cable for professional use
This Kramer Electronics coaxial cable carries SD and HD-SDI signals over 100 feet of RG-6 construction. It is built for installers and broadcasters who need a dependable 75 Ohm link between BNC-equipped cameras, routers or recorders. The male BNC connectors on each end lock securely for stable transmission in studio or field environments.
Suits fixed and portable video runs
The 30.5 metre length covers long rack-to-rack or outdoor camera runs without joins. It handles SD signals up to 259 metres and HD-SDI up to 344 metres, so the cable itself is not the limiting factor at this distance. Buyers who need a different connector type, a shorter patch lead or a plenum-rated jacket should look at other products.
75 Ohm impedance matches broadcast gear
The cable and both BNC connectors present a constant 75 Ohm characteristic impedance, which is the single specification that determines compatibility with standard SDI video equipment. A mismatch would cause reflections and bit errors, so verifying this figure against the device datasheet confirms the part is correct.
How it compares
Measured against everything we stock in Coaxial RF & Antenna Cables, at today’s prices. Recalculated every night.
- Price $51.99
- Pricier than about 81% of the 201 comparable items (median $20.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What is the maximum SD-SDI distance the RG-6 cable supports?
The cable is rated for SD-SDI transmission up to 259 metres, well beyond the 30.5 metre length supplied.
How much heat does the BNC coaxial cable generate during continuous video transmission?
Passive coaxial cables produce no measurable heat; the RG-6 construction simply carries the 75 Ohm signal without active components.
Which connectors must my equipment provide for this male-to-male BNC cable to work?
Your source and destination devices each need a female 75 Ohm BNC jack to accept the male BNC plugs on both ends.
More in Coaxial RF & Antenna Cables
Similar items
PANORAMA ANTENNAS, INC. C400NP-30NP coaxial rf cable 98.43 ft N-Type Male 10mm .4
- 1 x N-Type Male Ant…
- Antenna Cable
SatelliteSale RG-6 Trishield NEC 820 Coaxial RF Cable 500 ft
- Coax Cables
- Black





