Athena Power AP-P4ATX60FE 600W server power supply
- 600 W
- Single
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
500 W 80 Plus server PSU with 6+2 pin connector delivering 42 A on the 12 V rail, 100–240 V input in a 150×81×65 mm chassis
The Lemincrash 500W unit is an 80 Plus certified server power supply built for systems that require a 6+2 pin main connector. It accepts a universal 100-240 V input at 50/60 Hz and delivers a maximum output of 500W. The package contains the PSU only.
This supply matches the pin-out and power profile used in Acer platforms referencing FSP500-20TGBAB, GW-T300SPWC-TF, GW-TFX200AHD or HK300-71PP part numbers. Builders needing a different main connector, higher total wattage, or redundant hot-swap capability should look elsewhere.
The +12V rail provides 42A while the +5V and +3.3V rails supply 28A and 24A respectively, giving ample headroom for multi-drive arrays and add-in cards. The -12V rail is limited to 0.2A, so workloads dependent on strong negative-voltage lines will exceed its capacity.
Measured against everything we stock in Server & Hot-Plug PSUs, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Lemincrash |
| Product line | 80 Plus |
| Model name | 500 W |
| Power | |
| Max wattage | 500 W |
| Main power connector | 6+2pin |
| Output current | 42A @ 5 V, 28A @ 12 V, 24A @ 3.3 V |
| Supply voltage | 100–240 V |
| AC input frequency | 50/60 Hz |
| Rated input current | 5A @ 115 V, 2.5A @ 230 V |
| Size & build | |
| Product dimensions | 150 × 81 × 65MM |
| Product weight | 900g |
| In the box | |
| In the box | PSU*1 |
Your motherboard needs an 8-pin EPS or ATX12V socket that accepts the 6+2pin plug from the PSU.
The 5V rail supplies 42A and the 3.3V rail supplies 24A, so older drives and expansion cards that rely on those voltages remain well within spec.
Measure the yellow +12V wires under load; they should read close to 12V while delivering up to 42A, and the blue -12V wire should show roughly -12V at 0.2A.
More in Server & Hot-Plug PSUs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?