Athena Power AP-P4ATX60FE 600W server power supply
- 600 W
- Single
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
180 W server power supply with 12 V and 52 V outputs, 100–240 V input at 47–63 Hz, 80 Plus series, 700 g
The Lemincrash KSA-180S2 is a 180W server power supply built for systems that require the DPS-200PB-203A or DPS-200PB-185A form factor. It accepts a wide 100-240V input at 47-63Hz, making it suitable for global deployment in compatible rack or tower chassis. The unit delivers a combined 12V and 52V output configuration for specific server backplane requirements. Buyers needing a different voltage mix or higher wattage should verify their chassis specification before ordering.
Weighing 700g, the supply uses a switching topology certified to the 80 Plus efficiency standard, reducing waste heat inside dense server enclosures. The package contains only the PSU itself, so installers must reuse existing mounting screws, cables, and any chassis-specific brackets. No additional connectors or adapters are included, meaning the existing wiring harness must match the unit’s native pinout exactly. Technicians should confirm physical clearance and connector keying against the confirmation picture prior to installation.
This model replaces the DPS-200PB-203A and DPS-200PB-185A power modules when the part number and photo match the original hardware. The upgrade is worthwhile when the existing supply has failed, shows voltage drift, or cannot sustain load under continuous 180W operation. It is not a capacity increase over the original 180W rating, so systems already at the power budget limit will not gain headroom. Compatibility hinges on an exact part-number match; servers using other Delta or OEM form factors cannot use this unit.
Measured against everything we stock in Server & Hot-Plug PSUs, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Lemincrash |
| Product line | 80 Plus |
| Model name | KSA-180S2 |
| Power | |
| Max wattage | 180 W |
| Supply voltage | 100–240 V |
| AC input frequency | 47–63 Hz |
| Size & build | |
| Product weight | 700g |
| In the box | |
| In the box | PSU*1 |
The 80 Plus label confirms the supply meets certified efficiency levels across typical loads, so more of the 180W drawn from the wall reaches the 12V and 52V rails as usable power.
The unit weighs 700g and uses the standard server PSU form factor, so it fits the same chassis bays and screw pattern as the DPS-200PB-203A and DPS-200PB-185A it replaces.
Verify the part number on the label matches KSA-180S2 exactly and confirm the 100-240V, 47-63Hz input range suits your mains supply before sliding the unit into the bay and latching it.
More in Server & Hot-Plug PSUs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?