We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black PCIe 5.0 MCIO x4 to EDSFF 1C cable with 15-pin power, 1.6ft length

LetLinkSo

LetLinkSo LLS-CB-1MC1ED-01 PCIe 5.0 MCIO x4 to EDSFF 1C Cable 1.6ft

SKU CH-9F5P-97QEQ

Connects a PCIe 5.0 MCIO x4 host to E1.S, E1.L, E3.S or E3.L SSDs at 32 GT/s per lane over a 1.6 ft copper cable with integrated 15-pin power

  • Rated speed32 GT/s (per lane)
  • Connector count2
  • Connector details1 x MCIOx4 to 1 x EDSFF
  • Connector genderMale to Male
  • Conductor typeCopper Conductor
  • Product typePCIe 5.0
  • PCIe 5.0 at 32 GT/s per lane delivers blistering throughput
  • 15-pin power integrated into the EDSFF connector simplifies cabling
  • Supports E1.S, E1.L, E3.S and E3.L drives for broad server compatibility
  • 6 ft (50 cm) copper construction preserves signal integrity at speed
  • Hot-swappable design allows drive changes without system reboot

Purpose-built PCIe 5.0 interconnect

The LetLinkSo LLS-CB-1MC1ED-01 is a 1.6ft cable that links an MCIO x4 host port to a single EDSFF 1C drive connector. It targets server and storage builders who need PCIe 5.0 throughput for E1.S, E1.L, E3.S or E3.L solid-state devices. The assembly carries both signal and 15-pin power through a male-to-male copper conductor.

Straightforward rack installation

The 50 cm length fits typical 1U/2U cable routing without excess slack. Male-to-male terminals plug directly into the backplane and drive cage; no adapters or tools are required. Hot-swap capability lets technicians replace drives without powering down the chassis. The only common pitfall is reversing the connector orientation — keyed shrouds prevent damage but demand attention during the first mate.

Suited for dense PCIe 5.0 storage deployments

This cable serves integrators populating EDSFF bays from an MCIO x4 source at 32 GT/s per lane. It is not for environments that rely on SAS signalling or legacy backplanes lacking MCIO ports. Buyers needing multi-drive breakout cables, longer runs for full-rack cabling, or right-angle connectors for tight clearance should look at other configurations.

How it compares

Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.

Price $57.99
Pricier than about 90% of the 1,224 comparable items (median $26.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameLetLinkSo
Model nameLLS-CB-1MC1ED-01
Product typePCIe 5.0
Product colorBlack
Performance
Rated speed32 GT/s (per lane)
Ports & slots
Connector count2
Connector details1 x MCIOx4 to 1 x EDSFF
Connector genderMale to Male
Size & build
Overall length1.6 ft(50 cm)
Conductor typeCopper Conductor

Questions about this item

How can I verify the cable is running at the full PCIe 5.0 32 GT/s rate after installation?

Check the link speed reported by the host system or drive firmware; it should show 32 GT/s per lane on the x4 connection.

What connectors and power leads are included with the 1.6ft cable?

The cable has a male MCIO x4 connector on one end and a male EDSFF 1C connector with a 15-pin power segment on the other.

Which EDSFF drive form factors does this MCIO x4 cable support?

It is built for E1.S, E1.L, E3.S and E3.L solid-state drives.

More in SAS, SCSI, InfiniBand & MCIO Cables

Similar items