We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear 1.75 fl oz accelerator bottle with flip-top cap

Loctite

Loctite 135294 SF 7113 Accelerator 1.75 fl oz Bottle

SKU CH-RGHP-Z2B3P

Heptane-based accelerator speeds instant-adhesive cure in under one minute with 24-hour on-part life

  • Product typeSealing Compound
  • Speeds instant-adhesive cure to under one minute
  • Heptane-based formula dries clear and leaves no residue
  • 75 fl oz bottle provides controlled application
  • 24-hour on-part life keeps adhesive ready longer
  • Meets OSHA Hazard Communication Standard 29 CFR 1910.1200

Loctite SF 7113 Accelerator 1.75 fl oz

This Loctite SF 7113 accelerator comes in a 1.75 fl oz bottle and is formulated to speed the cure of instant adhesives. The clear, heptane-based liquid has a specific gravity of .68 and a viscosity of .4 cps. It is designed for use in assembly and repair tasks where faster fixture times are required.

Thermals noise and power draw

The product is a non-powered chemical accelerator, so it produces no operational noise or heat and draws no electricity. Its flash point is 28.4 Degrees F, indicating high flammability that requires careful handling and storage away from ignition sources. VOC content is 680 g/L at 99.9 percent by weight.

Behaviour under sustained load

On-part life is rated at 24 hr after application, and dry time is less than 1 min under normal conditions. The formulation complies with OSHA Hazard Communication Standard 29 CFR 1910.1200 and carries California Proposition 65 warnings for cancer and reproductive harm. It is not intended for applications requiring extended open time or non-flammable materials.

How it compares

Measured against everything we stock in Caulking & Sealing Supplies, at today’s prices. Recalculated every night.

Price $20.99
Pricier than about 57% of the 631 comparable items (median $16.99).

Specifications

Product
Brand nameLOCTITE
Product typeSealing Compound

Questions about this item

How do I apply the accelerator to the adhesive joint and what is the step users often miss?

Spray or brush the heptane-based accelerator onto the bonding area, then assemble the parts immediately; the step often missed is allowing the carrier to flash off for less than one minute before mating the surfaces.

How long does the accelerator remain active on the part and when must it be reapplied?

The on-part life is 24 hours; after that period the accelerator loses effectiveness and a fresh coat is required before applying the instant adhesive.

What is the first limitation encountered during continuous use of the accelerator?

The extremely low flash point of 28.4 °F means vapour ignition risk appears long before any performance degradation, so ventilation and ignition-source control are the primary constraints.

More in Caulking & Sealing Supplies

Similar items