Logico Cat5e UTP Ethernet cable 10 ft Black

10 ft Cat5e patch cable for wired networks

This 10 ft Cat5e UTP patch cable provides a standard wired Ethernet link for routers, switches, PCs and network-attached devices. It uses a true 24AWG stranded conductor built to Category 5E specifications and is terminated to the T-568B wiring standard. The 350 MHz rated bandwidth supports typical Gigabit Ethernet traffic in home and office environments.

Check your port type and required reach

Verify that both endpoints have RJ45 ports and that a 10 ft run covers the distance without tension. The cable is unshielded, so avoid routing it parallel to power cables or fluorescent ballasts where interference could degrade the signal. Ensure the snag-free boot clearance fits the jack spacing on your patch panel or device.

Gold contacts, strain relief and snag-free boot

The 50 micron gold-plated contacts resist oxidation for a stable connection over repeated insertions. Molded strain relief stops the RJ45 plug from bending at sharp angles, reducing cable fatigue at the termination point. The snag-free boot protects the locking tab during pulls through cable managers or tight pathways.