LORDWORLD 1U Vented Cantilever Shelf 10" 254mm 2-Pack Server Accessory

1U Vented Cantilever Shelf 2-Pack

This two-pack provides two 1U vented cantilever shelves designed for 19-inch racks and cabinets. Each shelf is 10 inches (254 mm) deep and constructed with 1.5 mm thick holding sides. The disassembled design lets you assemble the shelf with the lip facing up or down to suit different mounting needs. Supplied mounting hardware includes M6 screws with cage nuts and M5 screws with nuts.

Suits shallow rack gear not deep servers

The 254 mm depth works well for patch panels, small switches, audio-visual units and other lightweight network equipment that fits within the 44-pound load limit. Builders who need to support deeper chassis or heavier appliances should look at full-depth or four-post shelves instead. The cantilever format also leaves the rear of the rack open for cable management.

44-pound capacity per shelf with 10-inch depth

Each shelf comfortably holds up to 44 pounds of equipment distributed across its vented surface. The 10-inch depth gives enough room for shallow devices while keeping the rack footprint compact. Loads heavier than 44 pounds or gear deeper than 254 mm will exceed the design limits and require a different shelf type.