LORDWORLD Mini PCI-E to SATA 3.0 Four Port Adapter ASM1064 6.0Gbps
Adds four SATA 3.0 ports via Mini PCIe using an ASM1064 controller with 6.0, 3.0 and 1.5 Gbps link speeds, NCQ, hot-plug and power management
- Adds four SATA 3.0 ports via Mini PCI-E for SSD expansion
- ASMedia ASM1064 controller delivers 6.0 Gbps, 3.0 Gbps and 1.5 Gbps link speeds
- Native command queuing boosts drive performance and stability under heavy load
- Hot-swap and hot-plug support lets you change drives without powering down
- Partial and sleep power states reduce energy use when drives are idle
Mini PCI-E SATA 3.0 Four-Port Adapter
This LORDWORLD adapter adds four SATA 3.0 ports through a Mini PCI-E slot using the ASMedia ASM1064 controller. It supports link speeds of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps for SSDs or hard drives.
Suits builders adding SATA storage to a Mini PCI-E
It fits systems with a free Mini PCI-E slot that need up to four additional SATA drives. It is not for platforms without that slot type, nor for configurations requiring more than four ports or different host interfaces.
ASMedia ASM1064 controller with four SATA 3.0 ports
The ASM1064 chip provides native command queuing, hot-swap support and power management across all four ports. Verify the host slot and drive count match this specification before purchase.
How it compares
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
- Price $35.99
- Pricier than about 82% of the 1,761 comparable items (median $18.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | LORDWORLD |
Questions about this item
What motherboard slot is required for the LORDWORLD Mini PCI-E to SATA 3.0 adapter?
A free Mini PCI Express slot on the motherboard is required to install this adapter.
Will the ASM1064 controller work with my existing SATA 3.0 Gbps hard drives?
Yes, the ASM1064 supports 6.0, 3.0 and 1.5 Gbps SATA speeds, so older drives will operate at their rated rate.
How can I verify the four SATA ports are functioning after installation?
Check that the operating system detects all connected drives and that each reports a 6.0, 3.0 or 1.5 Gbps link speed.
More in Other Adapters & Couplers
Similar items
Cables To Go 03411 Two Port Keystone Single Gang Wall Plate White
- White
- With a wide selecti…
Monoprice Inc. 8729 S/PDIF Toslink gender changer White
- White
CableMAX USB to RS-232 Extender 270ft Cat5/6
- USB to DB9 (RS-232)
- Black





