LORDWORLD Sata 1 to 5 Port Expansion Adapter
Expands a single SATA connection into five ports using a 3.0 multiplier card
- Expands one Sata connection into five ports
- Supports Sata 3.0 at 6Gbps transfer speed
- Multiplier design adds drives without extra slots
- Good quality construction from LORDWORLD
- First listed by manufacturer in July 2026
SATA 3.0 6Gbps Port Multiplier
This LORDWORLD adapter expands a single SATA connection into five ports using SATA 3.0 6Gpbs multiplier technology. It suits builders adding multiple hard drives or SSDs to a system with limited motherboard headers. The card installs in a standard expansion slot and requires no proprietary drivers for basic operation.
Fits Standard Expansion Slot
The adapter plugs into an available motherboard slot and draws power from the board to drive the five downstream ports. It frees up internal SATA headers for other devices while consolidating cabling to one upstream link. Builders must ensure their platform supports port-multiplier enumeration for all five drives to appear.
Sustained Multi-Drive Throughput
Under continuous load the single 6Gbps upstream lane is shared across all active ports, so aggregate bandwidth divides among simultaneous transfers. Sequential performance per drive drops when several disks stream data together. The card is not suited for workloads demanding full 6Gbps on every port at once.
How it compares
Measured against everything we stock in Other Adapters & Couplers, at today’s prices. Recalculated every night.
- Price $27.99
- Pricier than about 74% of the 1,761 comparable items (median $18.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | LORDWORLD |
Questions about this item
How many SATA drives can I connect through this single SATA 3.0 port multiplier?
The adapter expands one SATA connection into five ports so up to five drives can be attached.
Will the card draw extra power or generate noticeable heat during continuous operation?
It is a passive port multiplier with no onboard controller so power draw and heat remain minimal.
Does my motherboard need a specific SATA controller mode for the multiplier to work?
The host port must support port-multiplier functionality; standard AHCI controllers usually provide this.
More in Other Adapters & Couplers
Similar items
Anker A8315 PowerExpand USB-C to DisplayPort Adapter
- USB Type-C to SATA
- USB Type C
Cables To Go 03411 Two Port Keystone Single Gang Wall Plate White
- White
- With a wide selecti…
BESCOOS NE8FF RJ45 Straight Coupler 0.06 lb
- 0.06 lb (0.03 kg)
- Data Transfer
Monoprice Inc. 8729 S/PDIF Toslink gender changer White
- White
TeKit USB 3.0 Sharing Switch 4 Port 2 Computers Adapter 30768
- UGREEN USB 3.0 Shar…
- Black





