Monoprice Inc. 140885 Flat Cat6 Network Ethernet Cable 10 ft Black 30AWG 550MHz
- Networking Patch Ca…
- 10 ft (3.05 m)
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 5-metre active optical cable carrying 100 Gb/s Ethernet over four 25 Gb/s channels with QSFP28 connectors and sub-3.5 W power draw
The LR-LINK QSFP28-AOC-5M is a 5 metre active optical cable designed for 100Gb or 40Gb Ethernet links. It uses four full-duplex channels, each operating up to 25Gbit/s, to deliver aggregate 100G throughput. The cable draws under 3.5W from a single 3.3V supply and conforms to the IEEE 802.3 bm standard.
This cable suits data-centre operators who need a lightweight, low-power alternative to direct-attach copper for intra-rack 100G links. It is not for buyers who require longer reach beyond the 5 metre length, nor for installations that demand industrial-grade temperature tolerance down to -20°C or up to +85°C.
The QSFP28 form factor is hot-pluggable, so the cable can be inserted or removed without powering down the switch or NIC. No driver or firmware configuration is required on the host side. The most common issue is mismatched port speed settings — both ends must be configured for 100G or 40G operation to establish a link.
Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | LR-LINK |
| Model name | QSFP28-AOC-5M |
| Product type | Network Ethernet Cables |
Both ends need QSFP28 ports that support 100G or 40G Ethernet over four 25Gbit/s channels.
The cable follows the 100G Ethernet IEEE 802.3 bm standard and is built for 100G or 40G Ethernet links; compatibility depends on the host port accepting a QSFP28 module at those speeds.
Confirm the link comes up at 100Gb/s or 40Gb/s, check that each of the four channels runs at up to 25Gbit/s, and ensure power draw stays below 3.5W.
More in Ethernet & LAN Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?