LUOM A0108 DisplayPort 2.1 cable 6.6 ft 80 Gbps 16K@60Hz
- 6.6 ft (2.01 m)
- DisplayPort Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
VESA-certified DisplayPort 2.1 cable delivers 80 Gbps bandwidth for 16K at 60 Hz, 8K at 120 Hz and 4K at 240 Hz over 10 ft
Cable Length 10 Feet
This 10 ft DisplayPort 2.1 cable carries up to 80 Gbps and supports resolutions such as 16K at 60 Hz with DSC, 8K at 120 Hz, and 4K at 240 Hz. It is made for gamers and creators who need a single link between a modern GPU and a high-refresh monitor or TV. The male-to-male connectors use solid copper conductors and triple shielding.
Builders who want lossless 16K@60 Hz, 8K@120 Hz or 4K@240 Hz over a 10 ft run will be served. Users whose source or display only have HDMI ports, or who need a longer reach than 10 ft, should look at a different interconnect.
The 80 Gbps bandwidth rating is the single figure that determines whether this cable can deliver the advertised 16K@60 Hz, 8K@120 Hz and 4K@240 Hz modes without compression artefacts.
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | LUOM |
| Model name | A0108 |
| Product type | DisplayPort Cable |
| Product color | Black |
| Performance | |
| Rated speed | Test Value |
| Display | |
| Refresh frequency | 16K(15360 × 8640) 60 Hz with DSC, 8K 120 Hz, 4K 240 Hz/165 Hz/120 Hz/144 Hz Support |
| Ports & slots | |
| Connector count | 1 |
| Source connector | 1 x DisplayPort2.1 |
| Destination connector | 1 x DisplayPort2.1 |
| Connector details | DisplayPort to DisplayPort 2.1 Cable 16K@60 Hz |
| Connector gender | Male to Male |
| Size & build | |
| Overall length | 10 ft (3.05 m) |
| Cable length | 10 ft (3.05 m) |
| Cable shielding | Triple-shielded |
| Conductor type | Solid Copper Conductor |
| Build details | Test123 |
| Compatibility | |
| Supported platforms | Works with Windows Vista |
Other versions of this model
The cable uses standard male DisplayPort 2.1 plugs on both ends; allow roughly 40 mm depth from the panel for the connector body plus room for the 10 ft length to route without sharp bends.
Align the wide side of each male plug with the port, push straight in until the metal latch clicks, then tug gently to confirm; the common miss is stopping at friction before the latch locks.
The cable is rated for over 15,000 bend cycles; replace it if the latch no longer holds, the aluminium shell shows corrosion, or intermittent signal loss occurs at 16K 60 Hz or 4K 240 Hz.
More in DisplayPort Monitor Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?