LUOM A0108 DisplayPort 2.1 Cable 10 ft 80 Gbps 16K@60Hz 4K@240Hz

10 ft DisplayPort 2.1 cable for high-resolution

This male-to-male cable connects a DisplayPort 2.1 source to a DisplayPort 2.1 display over a 10 ft distance. It supports bandwidth up to 80 Gbps and handles resolutions such as 16K at 60 Hz, 8K at 120 Hz, and 4K at 240 Hz. The cable is built with solid copper conductors and triple shielding for stable signal transmission. It suits gamers and professionals who need high refresh rates and deep colour from compatible hardware.

Bandwidth ceiling and compression at extreme

The link tops out at 80 Gbps and meets the VESA DisplayPort 2.1 standard with DSC 1.2a compression. Without compression, 16K at 60 Hz and 4K at 240 Hz cannot be carried at full 4:4:4 colour depth. HDCP 2.2 and HDCP 1.4 are supported for protected content. HDR10 and dynamic HDR metadata pass through when both source and sink implement them. The cable is backwards compatible with DisplayPort 2.0 and 1.4 devices, but they will negotiate lower speeds.

Plug-and-play connection with a compatibility caveat

Installation is a simple push-fit of the male connectors into the DisplayPort ports on the graphics card and monitor; no drivers or software are required. The most common issue is that the host GPU or display does not support the desired resolution or refresh rate, so the link falls back to a lower mode. Ensure both ends are rated for DisplayPort 2.1 and that the graphics driver is current. The 10 ft length is within the passive cable limit for the rated speeds.