LUOM TJ-A055 USB-C to DisplayPort 1.4 cable 3.3 ft 8K 60Hz 4K 240Hz
- 3.3 ft (1.01 m)
- DisplayPort Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 3.3 ft DisplayPort 2.0 cable supporting 80 Gbps bandwidth for 16K@60Hz, 8K@120Hz and 4K@240Hz gaming monitors
The LUOM TJ-A285 is a male-to-male DisplayPort 2.0 cable finished in green. It links a source and a display that both implement the 2.0 interface, making it suitable for creators and gamers who need the full 80 Gbps link bandwidth.
The cable carries 16K at 60 Hz, 8K at 120 Hz and 4K at up to 240 Hz with DSC 1.2a compression. At 3.3 ft the 80 Gbps signal remains stable; longer runs would exceed the certified reach and require an active solution.
A solid copper conductor and triple-layer shielding suppress interference on the 3.3 ft run. Nylon braiding rated for 30000 bends and 24K gold-plated plugs resist wear from repeated mating, so the link stays reliable on a desk that sees daily connect-disconnect cycles.
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | LUOM |
| Model name | TJ-A285 |
| Product type | DisplayPort Cable |
| Product color | Green |
| Performance | |
| Rated speed | Test Value |
| Display | |
| Refresh frequency | 16K@60 Hz, 8K@120 Hz, 4K@144 Hz, 4K@165 Hz, 2K@360 Hz |
| Ports & slots | |
| Connector count | 1 |
| Source connector | 1 x DisplayPort2.0 |
| Destination connector | 1 x DisplayPort2.0 |
| Connector details | DisplayPort to DisplayPort 2.0 Cable 16K@60 Hz |
| Connector gender | Male to Male |
| Size & build | |
| Overall length | 3.3 ft (1.01 m) |
| Cable length | 3.3 ft (1.01 m) |
| Cable shielding | Triple-shielded |
| Conductor type | Solid Copper Conductor |
| Build details | Test123 |
| Compatibility | |
| Supported platforms | Works with Windows Vista |
Other versions of this model
Yes, the cable is backwards compatible with DisplayPort 1.4 and 1.2, so it will function with your existing monitor using the same DisplayPort connectors.
Check your graphics control panel or monitor OSD to confirm the active resolution and refresh rate match the desired mode such as 16K@60Hz or 4K@240Hz.
The package contains only the male-to-male DisplayPort 2.0 cable; you must provide a DisplayPort 2.0 capable graphics card and monitor yourself.
More in DisplayPort Monitor Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?