We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
M.A. Ford 13625000C two-flute end mill finisher quarter-inch

M.A. Ford

M.A. Ford 13625000C Garden Statue

SKU CH-K937-ZE6DT

A 1/4 inch Tuffcut Al 2-flute end mill finisher for aluminium machining

  • Product typeCutting Tools
  • 2-flute end mill designed for aluminium finishing
  • 1/4 inch cutting diameter for precise milling
  • TuffCut AL series optimised for non-ferrous metals
  • California Proposition 65 warning for chemical exposure awareness
  • Manufacturer direct shipping on orders of $75 or more

M.A. Ford 13625000C end mill

The M.A. Ford 13625000C is a two-flute Tuffcut Al end mill finisher with a 1/4 inch specification. It is designed for machining aluminium and similar non-ferrous materials where a fine surface finish is required. This cutting tool suits CNC operators and machinists who need reliable performance in finishing passes. The product is supplied new from the manufacturer.

Thermals noise and power draw

As a solid carbide rotary cutter, the tool generates heat only through friction at the cutting interface during normal milling operations. Noise levels depend entirely on the machine spindle, work-holding rigidity and the chosen feed and speed parameters. Power consumption is determined by the machine tool and the specific cutting strategy employed by the operator.

Sustained load behaviour

Under sustained cutting loads the carbide substrate maintains its geometry and edge integrity for consistent finishing results. Tool life in extended runs is governed by the selected cutting parameters, coolant use and the aluminium alloy being machined. The two-flute design aids chip evacuation during longer tool paths to reduce re-cutting risks. California Proposition 65 warnings apply to this product.

How it compares

Measured against everything we stock in Yard Ornaments & Garden Statues, at today’s prices. Recalculated every night.

Price $38.99
Typical for this category: the median of 1,271 items is $40.99.

Specifications

Product
Brand nameM.A. FORD
Product typeCutting Tools

Questions about this item

How do I install the 13625000C end mill in my machine, and what step is most often done wrong?

Insert the 1/4 inch shank fully into the collet or holder, then tighten the collet nut to the machine manufacturer's specified torque; the step most often missed is verifying the tool is seated completely before tightening.

What maintenance or replacement will the 13625000C need after extended cutting?

The cutting edges will gradually dull; plan to resharpen or replace the tool when finish quality drops or cutting forces rise noticeably.

What limit appears first on the 13625000C during a long production run?

Edge wear on the two flutes typically becomes the limiting factor before the carbide substrate or coating fails.

More in Yard Ornaments & Garden Statues

Similar items