We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small silver ball-nose end mill with tapered neck and shank

M.A. Ford

M.A. Ford 156M0120N12A 1.2 mm Ball Nose End Mill

SKU CH-WR41-9JPRB

A 1.2 mm diameter ball nose end mill with a necked shank for deep milling operations

  • Product typeCutting Tools
  • 2-flute ball nose for smooth contouring
  • 2 mm cutting diameter for fine detail
  • Necked design improves reach in deep cavities
  • TuffCut DM coating extends tool life
  • California Prop 65 chemical warning applies

M.A. Ford 1.2 mm Ball Nose End Mill

This M.A. Ford Tuffcut DM end mill has a 1.2 mm ball nose and a two-flute necked design for precise contouring work. It is a new cutting tool supplied directly from the manufacturer for metalworking applications.

Machinists needing a small-radius ball nose

The tool suits CNC operators finishing complex 3D surfaces or tight internal radii in mould and die work. Buyers who need a larger cutting diameter or a higher flute count for heavy material removal should consider other options.

1.2 mm ball nose diameter

The 1.2 mm ball nose radius is the critical dimension that determines the minimum feature size and surface finish achievable. California Proposition 65 warnings apply because the product contains listed chemicals.

How it compares

Measured against everything we stock in Yard Ornaments & Garden Statues, at today’s prices. Recalculated every night.

Price $48.99
Pricier than about 59% of the 1,271 comparable items (median $40.99).

Specifications

Product
Brand nameM.A. FORD
Product typeCutting Tools

Questions about this item

How much heat does the 1.2 mm Tuffcut DM end mill generate when running all day in a CNC router?

The carbide tool produces heat proportional to feed rate and spindle speed; use coolant or air blast to manage temperature during extended cuts.

What shank size must my collet or tool holder accept for this 1.2 mm ball nose cutter?

The necked 2-flute end mill has a standard shank that fits common 3 mm or 1/8 inch ER collets; verify your holder’s clamping range before ordering.

Will the 156M0120N12A work reliably on an older CNC machine with higher spindle run-out?

The necked design reduces deflection, but consistent results still need a spindle with low run-out; check your machine’s specification before cutting.

More in Yard Ornaments & Garden Statues

Similar items