We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical silver drill bit with two spiral flutes and coolant hole

M.A. Ford

M.A. Ford CDACRM0350 Cyclone Drill 5X 2 Flute Coolant Fed 350

SKU CH-5WWB-PKW1R

A 5× diameter coolant-fed drill with two flutes for aluminium, model CDACRM0350

  • Designed for aluminium with 5X reach
  • Two-flute geometry clears chips efficiently
  • Coolant-fed design reduces heat buildup
  • Brand-new M.A. Ford Cyclone drill
  • California Prop 65 chemical warning applies

Cyclone Drill for Aluminium 5X

The M.A. Ford CDACRM0350 is a solid-carbide Cyclone drill built for aluminium. Its 5X diameter flute length and two-flute geometry are designed for high-speed production drilling. Internal coolant channels deliver fluid directly to the cutting zone for chip evacuation and tool life.

Suited for high-volume aluminium work.

Machinists running dedicated aluminium jobs on CNC machines with through-spindle coolant will benefit from the 5X reach and polished flutes. Shops without coolant-fed spindles, or those drilling steel, stainless or titanium, should select a different tool.

5X diameter flute length sets the drilling depth

The single specification that decides fit is the 5X diameter flute length, which determines the maximum hole depth in a single pass. Verify that your machine spindle and coolant system support through-tool delivery before ordering.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $108.99
Pricier than about 59% of the 2,412 comparable items (median $81.99).

Specifications

Product
Brand nameM.A. FORD

Questions about this item

How is the coolant-fed drill installed and what step is commonly missed?

The drill mounts in a standard tool holder; the step often missed is verifying that the machine's through-spindle coolant system is pressurised and filtered before the first cut.

What maintenance or replacement will the Cyclone drill need later?

The two-flute carbide tip will dull after extended aluminium drilling and should be resharpened or replaced once flank wear reaches the manufacturer's limit.

What limit appears first during sustained high-speed use?

Heat buildup in the coolant-fed flutes becomes the limiting factor, requiring reduced feed or dwell cycles to prevent thermal damage to the 350 mm cutting length.

More in Power Drills, Drivers & Cutting Bits

Similar items