M.A. Ford CDACRM1010 Cyclone Aluminium 5X 2 Flute Coolant Fed Drill
A 5× diameter, two-flute coolant-fed drill for aluminium machining, model CDACRM1010
- Cyclone design optimised for aluminium machining
- 5X diameter reach for deeper holes
- Two-flute geometry improves chip evacuation
- Coolant-fed delivery reduces heat buildup
- New M.A. Ford drill ready for use
Aluminium drilling specialist
The CDACRM1010 is a coolant-fed drill engineered for aluminium work. Its two-flute geometry and five-times-diameter reach suit production shops that need straight, deep holes without peck cycles. Buyers who need a general-purpose twist drill for steel or composite stacks will not find the flute design optimised for those materials.
Coolant-fed geometry
Internal coolant passages deliver lubricant directly to the cutting zone. This reduces built-up edge on aluminium and evacuates chips from deep holes. The feature does not replace external flood coolant on machines without through-spindle supply, and it adds no benefit when drilling dry.
Five-times-diameter reach
The 1010 designation reflects a 5×D drilling depth capability. This covers typical aerospace bracket and heat-sink thicknesses in a single pass. Workpieces thicker than that envelope, or interrupted cuts requiring extra rigidity, exceed the tool's intended range. P65 warning applies.
How it compares
Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.
- Price $248.99
- Pricier than about 85% of the 2,412 comparable items (median $81.99).
Specifications
| Product | |
|---|---|
| Brand name | M.A. FORD |
Questions about this item
When will the 2-flute coolant-fed drill need re-sharpening or replacement?
The 2-flute design with internal coolant feed reduces heat during aluminium drilling, extending edge life; re-sharpen or replace once flank wear reaches the manufacturer's recommended limit for the CDACRM1010.
What limits continuous drilling depth in a single pass?
The 5× diameter flute length sets the maximum uninterrupted drilling depth before chip evacuation requires a peck cycle on the CDACRM1010.
How much heat and noise does the cyclone drill generate during all-day aluminium runs?
Internal coolant delivery through the 2 flutes carries heat away from the cutting zone, keeping the CDACRM1010 cooler and quieter than non-coolant-fed drills in sustained aluminium work.
More in Power Drills, Drivers & Cutting Bits
Similar items
YINGHUA
YINGHUA 10PCS Single Flute UP Spiral Cutter 6x22x45mm
- Right-Angle Drills
$119.99
0.00145082BTC
In stock