We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical silver drill bit with spiral flutes and coolant hole

M.A. Ford

M.A. Ford CXDCL1250AP Cyclone XD 8X Coolant Fed Double Margin Drill 3.18 mm

SKU CH-8B4E-5BFY2

Coolant-fed double-margin drill cuts 3.18 mm holes with 8× diameter depth capability

  • Coolant-fed design enables deep-hole drilling
  • Double-margin geometry improves hole straightness
  • 8× diameter reach reduces tool changes
  • 18 mm diameter suits precision work
  • California Proposition 65 warning applies

Application

The M.A. Ford Cyclone XD CXDCL1250AP is an 8X coolant-fed double-margin drill sized at 3.18 mm. It targets machine shops and production cells that need deep, accurate holes in tough alloys where through-tool coolant delivery and guided margins improve chip control and finish.

Compatibility

Verify that your spindle and holder accept a 3.18 mm shank and that the machine can supply coolant through the tool at the required pressure. Confirm the workholding rigidity suits an 8X length-to-diameter ratio and that the controller can program the peck or dwell cycles the geometry demands.

Upgrade path

This drill replaces standard twist drills or single-margin tools when hole straightness, surface quality or tool life fall short in deep-hole operations. The step is justified when scrap rates rise on long holes or when cycle time must drop without adding secondary finishing passes.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $133.99
Pricier than about 66% of the 2,412 comparable items (median $81.99).

Specifications

Product
Brand nameM.A. FORD

Questions about this item

Does the Cyclone XD 8X drill include coolant fittings or must they be purchased separately?

The drill is a coolant-fed tool with double margins; fittings and coolant supply are not included and must be sourced separately.

Should I choose the 1/8 inch or 3.18 mm version for my application?

Both designations refer to the same 3.18 mm diameter; select the listing that matches your drawing call-out.

What does the 8X designation mean for hole depth in a CNC machine?

The 8X ratio allows drilling up to eight times the 3.18 mm diameter in a single pass when coolant pressure and feed rates are correct.

More in Power Drills, Drivers & Cutting Bits

Similar items