We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver Twister Xd coolant-fed drill bit 12.00 mm

M.A. Ford

M.A. Ford Twister Xd 3X Coolant Fed Drill 12.00Mm

SKU CH-5HW0-RYYN0

Coolant-fed drill bit with 3× diameter depth capacity for 12.00 mm holes

  • Coolant-fed design improves chip evacuation
  • 00 mm diameter suits precise drilling tasks
  • Twister XD geometry enhances cutting performance
  • 3X flute configuration supports efficient material removal
  • M.A. Ford brand delivers professional tool reliability

12.00 mm Twister Xd drill

The M.A. Ford Twister Xd is a 12.00 mm coolant-fed drill built for production drilling in steel and stainless steel. It targets machinists who need reliable chip evacuation and consistent tool life on CNC machines or rigid manual setups.

Capacity and headroom

The three-flute design with internal coolant channels clears chips efficiently at 3× diameter depth, reducing cycle time on through-holes. Without pecking, the drill reaches its practical limit near the 3× depth mark, so deeper holes require a different tool or a peck cycle.

Fit in a build

The shank fits standard 12.00 mm holders and works with any machine that supplies through-spindle coolant at adequate pressure. It eliminates the need for external coolant nozzles and frees up spindle clearance for tight fixture layouts.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $210.99
Pricier than about 80% of the 2,412 comparable items (median $81.99).

Specifications

Product
Brand nameM.A. FORD

Questions about this item

Will the 12.00 mm Twister Xd 3X Coolant Fed Drill fit the coolant-through holders on my existing CNC lathe?

The 12.00 mm shank diameter matches standard coolant-through tool holders, so the drill seats directly without an adapter.

How do I verify the 3X coolant feed is flowing correctly after installation?

Start the machine at low RPM and watch for a steady stream exiting the two flute outlets; consistent flow confirms the internal channels are clear.

Does the 2XDCS4724A package include the drill only, or are collets and coolant fittings supplied?

The box contains the Twister Xd drill itself; collets, pull studs and coolant connectors must be sourced separately.

More in Power Drills, Drivers & Cutting Bits

Similar items