We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twister Xd 5X coolant-fed drill bit, 11.40 mm diameter, metallic finish

M.A. Ford

M.A. Ford Twister Xd 5X Coolant Fed Drill 11.40 mm 2XDCR4488A

SKU CH-ZDHP-NDGK6

A 11.40 mm coolant-fed drill designed for five-times-diameter depth drilling

  • Twister Xd design drills 5× diameter holes in one pass
  • 40 mm diameter suits precise hole-making tasks
  • Internal coolant feed clears chips and reduces heat
  • M.A. Ford construction delivers professional-grade durability
  • California Proposition 65 warning informs safe handling practices

Twister Xd 5X Coolant Fed Drill 11.40 mm

The M.A. Ford Twister Xd 5X is a coolant-fed drill bit sized at 11.40 mm and identified by part number 2XDCR4488A. It is built for production drilling where through-tool coolant delivery improves chip evacuation and tool life.

For high-volume metal drilling with through-coolant

This drill suits CNC machines equipped with through-spindle coolant systems that can feed a 5X diameter depth. It is not for handheld use, machines without coolant capability, or applications requiring a different diameter or length.

11.40 mm diameter with 5X depth and coolant feed

The single specification that decides fit is the 11.40 mm cutting diameter combined with a 5X depth-to-diameter ratio and internal coolant channels. Verify your machine spindle and coolant pressure match these parameters before ordering.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $271.99
Pricier than about 87% of the 2,412 comparable items (median $81.99).

Specifications

Product
Brand nameM.A. FORD

Questions about this item

What machine spindle and coolant system do I need to run this 11.40 mm Twister Xd drill?

It requires a CNC or rigid milling spindle that accepts a 11.40 mm shank and a through-spindle coolant supply rated for the drill's 5X design pressure.

Can I use this coolant-fed drill in an older CNC that only has external flood coolant?

No — the 2XDCR4488A is built for through-tool coolant delivery; external flood cannot reach the cutting zone at the required pressure.

How do I confirm the drill is cutting correctly after installation?

Watch for steady chip evacuation through the coolant holes, consistent hole diameter at 11.40 mm, and no excessive flank wear on the cutting edges.

More in Power Drills, Drivers & Cutting Bits

Similar items