Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts two 6-pin or 8-pin PCIe connectors into a single 12-pin mini connector for RTX 30 series graphics cards
This Manw adapter connects a dual 6/8-pin female output from an existing power supply to the mini 12-pin male connector found on RTX 30-series graphics cards. It is intended for builders who want to run a compatible GPU without replacing their current PSU. The cable uses a new copper core and contains no recycled materials.
The adapter bridges the gap when a power supply lacks the native 12-pin plug required by cards such as the RTX 3090, 3080, 3070, 3060 and 3050. It is worth using when the PSU already delivers sufficient wattage on its 6-pin or 8-pin rails and you prefer not to buy a new unit. It does not add power capacity; it only converts the physical connector.
The cable handles the current draw of supported RTX 30-series models when the host power supply meets the card's own wattage specification. Headroom is limited by the PSU's 6-pin or 8-pin rail rating, not by the adapter itself. It will not work with graphics cards that use a different power interface or with motherboards lacking the required CPU 12-pin header.
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Manw |
The cable requires two standard PCIe 6-pin or 8-pin female sockets from the power supply to feed the mini 12-pin male plug.
The keyed mini 12-pin male end only seats one way; align the notch with the card's socket and press straight in until the latch clicks.
Check for discoloured pins or brittle insulation after heavy overclocking sessions; replace the adapter if any conductor shows heat damage.
More in Internal PSU & Riser Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?