Monoprice Inc. 140885 Flat Cat6 Network Ethernet Cable 10 ft Black 30AWG 550MHz
- Networking Patch Ca…
- 10 ft (3.05 m)
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 3 m passive copper cable with SFP28 connectors on both ends, rated for 25 Gb/s Ethernet links
The Mellanox MCP2M00-A003 is a passive copper SFP28 cable built for 25 Gb/s Ethernet links between network devices in a rack. It suits data-centre operators who need a fixed-length, low-power interconnect for top-of-rack or switch-to-server runs.
As a passive assembly it draws no external power and adds no active cooling noise to the cabinet. The 28 AWG copper pair operates within the IEEE 802.3by and SFF-8402 limits at a 3.13 GB/s transfer rate without generating measurable heat.
Each end carries an SFP28 connector with an onboard EEPROM that the host reads for link validation. The black 9.84 ft jacket routes cleanly between adjacent ports, and the single-pair construction keeps the bend radius practical for dense patch-panel work. Buyers needing longer reaches or active equalisation will need a different cable type.
Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Mellanox |
| Product type | SFP28 |
| Connectivity | |
| Cable category | SFP28 |
| Ports & slots | |
| First connector | 1 x SFP28 Network |
| Second connector | 1 x SFP28 Network 1 x SFP28 - Network |
Align each SFP28 connector with the switch or NIC port and push until the latch clicks. The step often missed is confirming the EEPROM data appears in the host system, which verifies the link is fully seated and recognised.
No scheduled maintenance is required. Inspect the SFP28 latches and cable jacket periodically; replace the cable if the latch no longer holds, the jacket shows kinks or cuts, or link errors appear at 25 Gb/s.
The 3 m, 28 AWG passive construction reaches its signal-integrity limit before active or optical alternatives, so sustained 25 Gb/s traffic may show rising bit errors if the link exceeds the IEEE 802.3by passive-copper reach specification.
More in Ethernet & LAN Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?