Micro Connectors RAS-PWR13-PI USB-C 5V/3A Power Adapter 47 in
USB-C 5 V / 3 A power adapter with on/off switch, 47-inch cable, UL and FCC listed, DOE Level VI efficiency, and short-circuit protection for Raspberry Pi 4 and other USB-C single-board computers
- Product colorBlack
- UL and FCC approved for safe operation
- Convenient on/off switch controls power without unplugging
- DOE Level VI efficiency reduces energy waste
- Over-current and short-circuit protection safeguards connected boards
- 5 V 3 A output with 47-inch cable reaches distant outlets
USB-C Power Adapter for Raspberry Pi 4
This Micro Connectors RAS-PWR13-PI adapter delivers 5V at 3A through a USB-C connector. It is built for Raspberry Pi 4 Model B and other single-board computers that use the same port. The 47-inch cable gives flexible placement on a bench or in an enclosure. UL and FCC listings confirm regulatory compliance.
3 Amp Output with Protection Circuits
The 5V/3A rating supplies enough current for a Pi 4 under typical desktop or server workloads with attached peripherals. Over-current and short-circuit protection shut the unit down before damage can spread to the board. The DOE Level VI efficiency mark means low no-load draw when the switch is off.
Fixed Cable Length and Mains Input Range
The captive 47-inch cable cannot be replaced or extended without splicing, so the adapter must sit within that radius of the device. Input accepts AC 100-240V at 50-60Hz for worldwide mains compatibility. No battery-backup or PoE function is provided, so a separate UPS is required for ride-through.
How it compares
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 93% of the 3,875 comparable items (median $23.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Black |
Questions about this item
Will the 47 inch cable reach my Raspberry Pi 4 if the board sits behind a monitor on the same desk?
The 47 inch cable provides roughly four feet of reach, which is enough for a typical desk layout with the Pi mounted behind a display.
How can I confirm the adapter is delivering the correct 5V/3A output once it is plugged in?
The green LED on the USB-C connector lights when power is present, and the Pi 4 boot sequence will start without the low-voltage warning icon.
Does the package include any mounting hardware or extra cables besides the 47 inch USB-C lead?
Only the power adapter with its integrated 47 inch USB-C cable and the built-in on/off switch are included; no mounting brackets or additional cables are supplied.
More in AC Adapters & Power Bricks
Similar items
Unbranded 90W AC Adapter 19V 4.74A 7.4mm*5.0mm Black
- AC/Standard
- AC/Standard





