We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board M.2 22110 SSD with black controller and NAND chips

Micron

Micron 7450 PRO 3.84TB M.2 22110 NVMe PCI-Express 4.0 MTFDKBG3T8TFR-1BC1ZABYYR

SKU CH-V4WS-8S9HF MPN MTFDKBG3T8TFR-1BC1ZABYYR

Enterprise 3.84TB M.2 22110 NVMe PCI-Express 4.0 drive with 7300TBW endurance

  • Total capacity3.84 TB
  • Sequential read speedUp to 4,400 MB/s
  • Sequential write speedUp to 2,600 MB/s
  • Interface typePCI-Express 4.0 x4
  • Form factorM.2 22110
  • Product typeInternal Solid State Drive (SSD)
  • 84 TB capacity supports large enterprise datasets
  • PCI-Express 4.0 x4 interface delivers up to 4400 MBps sequential read
  • NVMe 2.0 protocol enables up to 2600 MBps sequential write
  • 7300 TBW endurance rating suits write-intensive workloads
  • M.2 22110 form factor fits compatible enterprise servers

Enterprise M.2 22110 NVMe SSD

The Micron 7450 PRO is a 3.84TB internal solid-state drive built for enterprise workloads. It uses the M.2 22110 form factor and connects through a PCI-Express 4.0 x4 interface with NVMe 2.0 protocol. The drive delivers sequential reads up to 4400 MBps and writes up to 2600 MBps.

Suited for write-intensive servers, less for laptops

This SSD targets servers and storage arrays that demand sustained write endurance, rated at 7300TB written. Systems limited to shorter M.2 slots cannot accommodate the 110 mm length. Consumer desktops without enterprise-grade cooling or power-loss protection should evaluate alternatives.

Steady throughput under continuous writes

Under sustained load the drive maintains its rated sequential write speed rather than throttling after a short burst. The 7300TB endurance rating reflects consistent performance across the warranty period. Thermal management relies on system airflow since no heatsink is included.

How it compares

Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.

Price $3,237.99
Pricier than about 92% of the 1,994 comparable items (median $180.49).
Total capacity 3.84 TB
Higher than about 89% of the 1,368 comparable items (median 1 TB).
Sequential read speed Up to 4,400 MB/s
Higher than about 66% of the 1,180 comparable items (median 2,400 MB/s).
Price per TB $843.23 per TB
Pricier than about 90% of the 1,362 comparable items (median $165.50 per TB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameMicron
Product line7450 PRO
Model nameMTFDKBG3T8TFR-1BC1ZABYYR
Total capacity3.84 TB
Product typeInternal Solid State Drive (SSD)
Intended useEnterprise
Performance
Sequential read speedUp to 4,400 MB/s
Sequential write speedUp to 2,600 MB/s
Storage
Write endurance7300 TB
Connectivity
Connection protocolNVMe 2.0
Ports & slots
Interface typePCI-Express 4.0 x4
Size & build
Form factorM.2 22110
Heat sinkWithout HeatSink
Shipping weight0.02 kg
Package size25 × 25 × 25 mm

Questions about this item

Does my motherboard need an M.2 22110 slot and PCIe 4.0 x4 wiring to use this 3.84TB drive?

Yes, the drive is an M.2 22110 module that requires a matching 110 mm slot and a PCIe 4.0 x4 electrical connection for full NVMe 2.0 operation.

Will this SSD run on a platform that only supports PCIe 3.0 x4?

The drive will operate at PCIe 3.0 x4 speeds on an older platform, reducing sequential throughput below the 4400 MBps read and 2600 MBps write ceiling.

How can I verify the 7450 PRO is delivering its rated 4400 MBps read and 2600 MBps write after installation?

Run a sequential benchmark such as CrystalDiskMark or fio with a large-block workload and compare the results to the 4400 MBps read and 2600 MBps write specifications.

More in Internal NVMe & SATA SSDs

Similar items