XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
M.2 2280 2TB internal SSD with PCI-Express 4.0 interface delivering up to 6600 MBps read and 5000 MBps write speeds
The Micron 3400 Series MTFDKBA2T0TFH-1BC1AA is a 2TB internal SSD built for consumer workloads. It uses the M.2 2280 form factor and connects through a PCI-Express 4.0 interface with NVMe 1.4. TLC memory components provide the storage medium for everyday computing and content creation.
Host-controlled thermal management lets the system regulate drive temperature during normal operation. Power-loss protection secures data at rest while a power-loss signal prepares the controller for sudden shutdowns. Hardware-based AES 256-bit encryption runs without measurable impact on throughput or power consumption.
Dynamic write acceleration maintains write performance when workloads extend beyond short bursts. The drive is rated for 1200TB written and an MTTF of 2 million hours. TCG Opal 2.01 and TCG Pyrite 2.01 support enterprise-grade security during prolonged use. Micron Storage Executive tool monitors health and applies firmware updates.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Micron |
| Product line | 3400 Series |
| Model name | MTFDKBA2T0TFH-1BC1AA |
| Total capacity | 2 TB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 6,600 MB/s |
| Sequential write speed | Up to 5,000 MB/s |
| Random read (4K) | Up to 720,000 IOPS |
| Random write (4K) | Up to 700,000 IOPS |
| Read latency | 55 µs |
| Write latency | 14 µs |
| Storage | |
| NAND flash type | TLC |
| Write endurance | 1200 TB |
| Ports & slots | |
| Interface type | PCI-Express 4.0, NVMe 1.4 |
| Size & build | |
| Form factor | M.2 2280 |
| Shipping weight | 0.23 kg |
| Package size | 178 × 76 × 13 mm |
| More details | |
| Mean time to failure | 2 Million |
Insert the drive into the PCI-Express 4.0 slot at a 30-degree angle, secure it with the motherboard screw, then enable NVMe 1.4 in BIOS; the step most people skip is checking that the motherboard PCIe lane allocation supports full 4.0 x4 bandwidth.
The drive has a 1200 TBW endurance rating and 2 Million hour MTTF; no routine maintenance is required, but once the 1200 TBW limit is reached the NAND cells may no longer guarantee data retention and the drive should be replaced.
Under continuous write loads the host-controlled thermal management will throttle performance to protect the controller; the dynamic write acceleration buffer can absorb bursts, but sustained writes beyond the SLC cache will hit the thermal throttle limit before the 5000 MBps sequential write ceiling.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?