Misskit 2-Pack DC 12V/24V to 5V USB-C Buck Converter 5A 25W Waterproof Power Adapter
Two waterproof buck converters step 12 V or 24 V input down to 5 V at 5 A for USB-C devices
- Adapter typePower Converter
- Converts 12 V or 24 V vehicle power to 5 V USB-C for phones and Pi boards
- Delivers up to 5 A and 25 W for fast charging of tablets and single-board computers
- 90 % conversion efficiency reduces heat and extends battery run-time
- Built-in protection against reverse polarity, overload, over-current, overheat, low voltage and short circuit
- Two waterproof modules included for redundant or dual-device installations
Two-pack buck converter for 12 V or 24 V systems
This twin-pack steps down 12 V or 24 V DC to a steady 5 V USB-C output rated at 5 A and 25 W. It suits Raspberry Pi 4 projects, phone charging or any 5 V device that draws up to the full rated current.
Simple wiring with built-in safeguards
Connect the input leads to an 8 V to 32 V source; reverse-polarity, over-current, over-temperature, low-voltage and short-circuit protection are integrated. The module accepts a wide range so a precise 12 V or 24 V rail is not mandatory, but the input must stay within the stated window.
High-efficiency sustained output
A switching regulator delivers around 90 % conversion efficiency, limiting heat during continuous 5 A loads. The waterproof housing helps in damp environments, yet prolonged maximum draw still requires adequate airflow to keep the internal temperature within safe limits.
How it compares
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
- Price $24.99
- Typical for this category: the median of 3,875 items is $23.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Adapter type | Power Converter |
Questions about this item
How can I confirm the converter is delivering 5 V at up to 5 A after wiring it?
Measure the USB-C output with a multimeter under load; it should read 5 V while supplying up to 5 A, and the built-in protections will shut down if limits are exceeded.
What comes in the package and what extra items are needed?
The pack contains two buck converter modules with USB-C output; you must supply a DC source between 8 V and 32 V and the USB-C cable for your device.
Should I use the 12 V or 24 V input setting for my Raspberry Pi 4?
Both 12 V and 24 V are within the recommended 8–32 V range; choose the voltage that matches your existing power supply.
More in AC Adapters & Power Bricks
Similar items
TAURKENAM 31526 125V Grounded Heavy Duty Extension Cord 6-Foot Beige
RUIQIU 90W 19.5V 4.62A Dell Optiplex Power Adapter 4.5mm
- 5 V
- 90 W, 19.5 V, 4.62…





