We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue SATA cable 1.5 ft straight to 90-degree locking connectors

Monoprice Inc.

Monoprice 108783 SATA Adapter 1.5 ft Blue 90 to 180 Degree Locking Latch

SKU CH-904H-4D4DN

A 1.5 ft blue SATA cable with a straight connector on one end and a 90-degree connector on the other, both with locking latches

  • Cable length1.5 ft (0.46 m)
  • Product colorBlue
  • Key featuresBuy with Confidence: With Monoprice's Lifetime Warranty on a
  • Product weight0.04
  • Supports 6 Gbps data rates with SATA 3.0 devices
  • 90-degree to 180-degree connectors improve routing in tight cases
  • Locking latches on both ends prevent accidental disconnection
  • Backwards compatible with SATA 1.5 and 3 Gbps hardware
  • Lightweight 1.5 ft blue cable weighs only .04 lb

SATA 6 Gbps cable with angled connectors

This 1.5 ft internal cable carries SATA 6 Gbps signals between a host controller and a drive. One end uses a straight connector and the other a 90-degree connector, both fitted with locking latches. The blue jacket aids visual identification in a crowded chassis. It suits builders who need a short, secure link in tight spaces.

Replaces a standard straight-to-straight SATA lead

Swap to this cable when a straight connector fouls a drive cage, GPU backplate or side panel. The 90-degree end reduces bend radius and the locking latches prevent accidental disconnection from vibration. The upgrade is worth it only if your current cable cannot be routed cleanly or has worked loose in service.

Check connector clearance

Verify that the 90-degree plug points the correct way for your drive port and that the straight end reaches the motherboard socket without tension. Confirm the locking tabs can be depressed after installation. The cable is backwards compatible with SATA 3 Gbps and 1.5 Gbps devices, but the subsystem will run at the slowest device speed.

How it compares

Measured against everything we stock in Network Adapters & RJ45 Plugs, at today’s prices. Recalculated every night.

Price $4.99
Cheaper than about 97% of the 1,221 comparable items (median $19.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameMonoprice
Model name108783
Part number108783
Product colorBlue
Size & build
Cable length1.5 ft (0.46 m)

Questions about this item

Does the straight-through connector on the 108783 fit a standard SATA drive port?

Yes, the straight-through connector on one end plugs directly into a standard SATA drive port while the other end uses a 90-degree angle.

How do I engage the locking latch on each end of the 1.50 ft cable?

Push each connector firmly into the port until the latch clicks into place; the latch prevents the cable from working loose due to vibration.

Will the 108783 cable need replacement if I upgrade to a faster SATA controller?

No, the cable is certified for SATA Revision 3.0 up to 6 Gbps and remains compatible with slower SATA devices.

More in Network Adapters & RJ45 Plugs

Similar items