We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Monoprice Inc.

Monoprice 121681 Onix Series Coaxial RF Cable 15ft 75ohm 97% OFC

SKU CH-NQNW-AGNDQ

A 15-foot CL2-rated coaxial cable with 75-ohm impedance, 97% oxygen-free copper conductor and double copper-braid shielding for digital audio or composite video

  • Connector count2
  • Connector genderMale to Male
  • Product typeOthers
  • Overall length4.572
  • Key featuresBuy with Confidence: With Monoprice's Lifetime Warranty on a
  • 15 ft length suits typical home theatre runs
  • 97 % oxygen-free copper conductor preserves signal purity
  • Double copper braid shielding blocks EMI and RFI
  • CL2-rated jacket permits in-wall installation
  • Braided nylon outer sleeve resists nicks and cuts

Monoprice 121681 Onix Coaxial Cable

The Monoprice 121681 Onix Series is a 15-foot coaxial RF cable built with RG-6/U construction and 75-ohm impedance. It uses 97% oxygen-free copper conductors and double copper braid shielding to protect signals from EMI and RFI interference. Gold-plated RCA male connectors sit at both ends. The CL2-rated jacket is wrapped in braided nylon for added durability and a clean finish.

Suited for digital audio and composite video

This cable works well for S/PDIF digital audio connections between components such as DACs, receivers or streamers. It also handles composite video and other line-level RCA signals. Buyers needing longer runs for whole-home distribution or installations requiring plenum-rated cable should look at alternatives. It is not designed for high-frequency RF applications beyond standard consumer audio and video bandwidths.

Check connector spacing and routing path

Verify that 15 feet (4.572 metres) reaches between your source and destination with enough slack for strain relief. Confirm both devices use female RCA jacks, as this cable terminates in male plugs on each end. Ensure the CL2 rating satisfies any local building code requirements for in-wall installation. The braided nylon jacket adds thickness, so check tight bends or conduit fill before pulling the cable.

How it compares

Measured against everything we stock in Coaxial RF & Antenna Cables, at today’s prices. Recalculated every night.

Price $15.99
Cheaper than about 60% of the 201 comparable items (median $20.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameMonoprice
Model name121681
Product typeOthers
Ports & slots
Connector count2
Connector genderMale to Male

Questions about this item

What type of RCA-equipped devices must I already own to use the 121681 cable?

You need two components with female RCA jacks — such as a receiver, DAC, subwoofer, or TV — because the cable terminates in gold-plated male RCA plugs on both ends.

Will the 75-ohm RG-6/U construction work with older composite-video gear I want to keep?

Yes. The 75-ohm impedance matches legacy composite video and standard line-level RCA signals, so older equipment will operate normally.

How can I verify the double copper-braid shielding is doing its job after installation?

Play a digital audio or composite video source; a clean, noise-free signal with no hum or picture artifacts confirms the 97 % OFC conductor and dual braid are rejecting EMI and RFI.

More in Coaxial RF & Antenna Cables

Similar items