We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue Cat6A patch cable with snagless RJ45 connectors

Monoprice Inc.

Monoprice 144652 Cat6A Patch Cable 10 Feet Blue 24AWG 500MHz CMR UTP

SKU CH-GHKS-PGKYZ

Cat6A patch cable, 10 feet, 24 AWG pure copper, 500 MHz tested, CMR riser rated, ultra-short snagless boots for high-density racks

  • Product typeNetworking Patch Cables
  • Key featuresComponent Level: Compliant with TIA 568.2-D & ISO 11801, 100
  • Component-level tested to TIA 568.2-D and ISO 11801 for reliable 10 Gb Ethernet
  • CMR-rated bare copper conductors allow safe in-wall and riser installation
  • Ultra-short snagless boot reduces bend radius for tight, high-density rack spaces
  • 50 µm gold-plated RJ45 contacts with strain relief maintain long-term signal integrity
  • 24 AWG stranded pure copper verified to 500 MHz on Fluke DSX-8000

10-foot Cat6A patch cable for dense racks

This 10-foot Cat6A patch cable uses 24 AWG stranded pure bare copper conductors in a UTP design. It is built for high-density data environments such as data centres and server rooms where space is limited. The ultra-short snagless boot reduces congestion and allows a tighter bend radius in shallow cabinets. Component-level compliance with TIA 568.2-D and ISO 11801 is verified by 100 percent transmission testing.

500 MHz component-level limit for 10 GbE runs

The cable is rated to 500 MHz and has passed the DSX-8000 Fluke Patch Test at that frequency, confirming component-level performance for 10 Gb Ethernet over UTP. CMR riser rating permits installation in walls, risers and between floors of commercial buildings. Gold-plated contacts rated at 50 micro-inches and strain-relief boots protect long-term signal integrity. The IEEE 802 standard for 10 Gb Ethernet over UTP cable is supported.

Replaces bulkier Cat6A

Installers upgrading from standard-boot Cat6A or Cat6 patch cords gain the shorter bend radius needed for high-density patch panels and limited-depth racks. The micro SlimRun profile eases cable management where every millimetre counts. Buyers who need longer runs beyond 10 feet or a different jacket rating should select an alternative length or cable type.

How it compares

Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.

Price $11.99
Cheaper than about 65% of the 9,945 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameMonoprice
Model name144652
Product typeNetworking Patch Cables

Questions about this item

What length should I pick for a standard rack-to-switch run?

The cable is supplied in a 10-foot length, suited for typical rack-to-switch or patch-panel connections in a 24 AWG stranded construction.

How does the 500 MHz rating translate to actual throughput?

The 500 MHz bandwidth enables 10 Gb Ethernet performance over the full 10-foot run when the cable is terminated to component-level specifications.

Is the RJ45 connector compatible with standard keystone jacks and switch ports?

Yes, the snagless RJ45 plug uses a standard 8P8C form factor with 50 µ gold-plated contacts, fitting any Cat6A-compatible jack or port.

More in Ethernet & LAN Cables

Similar items