Monoprice 2823 16AWG 100 ft coaxial rf cable
A 100 ft 16AWG coaxial RF cable built with 99.5% pure oxygen-free copper for reliable signal transmission
- Connector count1
- Overall length100 ft (30.5 m)
- 100 ft length suits whole-home speaker runs
- 16 AWG gauge handles typical amplifier currents
- 5 % oxygen-free copper reduces signal loss
- CL2 rating allows in-wall installation
- 2-conductor design simplifies stereo hookup
100-foot 16AWG speaker cable
The Monoprice 2823 is a 100 ft 16AWG cable built with 99.5% pure oxygen-free copper conductors. It is designed for stereo or home-theatre installations that require long, uninterrupted runs between an amplifier and passive speakers. The two-conductor layout supports standard left and right channel wiring.
CL2-rated in-wall construction
The cable carries a CL2 rating, allowing it to be routed inside walls or ceilings to meet building-code requirements for fire safety. Oxygen-free copper reduces resistance over the 100-foot length, helping to preserve signal integrity without excessive voltage drop. The flexible jacket eases pulling through studs and around corners during installation.
Bare-copper ends ready for termination
Both ends are supplied as bare copper with no factory-fitted connectors, so you can terminate them with banana plugs, spade lugs or direct binding-post connections to match your equipment. The single-conductor count means each cable run carries one channel; a second cable is needed for the return path in a typical stereo pair. No additional software or accessories are included.
How it compares
Measured against everything we stock in Coaxial RF & Antenna Cables, at today’s prices. Recalculated every night.
- Price $42.99
- Pricier than about 76% of the 201 comparable items (median $20.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Monoprice |
| Model name | 2823 |
| Ports & slots | |
| Connector count | 1 |
| Size & build | |
| Overall length | 100 ft (30.5 m) |
Questions about this item
How do I install the 16AWG 100 ft cable and what step is commonly missed?
Strip each end cleanly, then tighten the F-type connector fully by hand before using a wrench for the final quarter-turn; skipping the hand-tight start often cross-threads the nut.
What maintenance or replacement will the 99.5% oxygen-free copper cable need later?
Inspect the jacket annually for UV cracking or kinks; if the braid shows corrosion or the centre conductor feels loose in the F-pin, replace the run.
What limit appears first on the 2823 cable during sustained high-power audio use?
The 16 AWG gauge sets the practical ceiling — voltage drop over 100 ft becomes audible before the oxygen-free copper itself degrades.
More in Coaxial RF & Antenna Cables
Similar items
Laird Technologies Belden 1855A RG59 BNC Straight to Right Angle 15 ft coaxial rf cable
Logico 50X-BNC119 50-pack BNC Compression Connector for RG6 Quad Shield
- Connector Adapter
VideoSecu CBS300W RG59 Siamese Coaxial RF Cable 300ft White
- • RG59/U Type Coaxi…
- • Power and Video C…





