XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 250 GB M.2 2280 SATA internal SSD with MLC NAND, up to 550 MBps read, 530 MBps write and 86,000 IOPS random read
The Mushkin Enhanced Atlas Vital is an M.2 2280 internal solid-state drive built for consumer PCs and laptops that accept SATA-based M.2 modules. It provides 250GB of storage using MLC NAND flash and a SandForce controller. The drive fits any M.2 2280 slot wired for SATA signalling.
The drive connects through a SATA 3.0 (6Gb/s) interface and is backwards-compatible with SATA 3Gb/s ports. Sequential reads reach up to 550 MBps and writes up to 530 MBps, while 4KB random reads hit up to 86,000 IOPS. These figures represent the practical ceiling of the SATA III bus.
High-reliability MLC NAND is paired with built-in BCH ECC capable of correcting up to 55 bits per 512 byte sector. An integrated thermal sensor monitors drive temperature across an operating range of 0°C to +70°C. TRIM and SMART support maintain performance and health reporting, and firmware is user-upgradeable. The 3.50mm height, 22mm width and 80mm depth conform to the standard M.2 2280 footprint.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Mushkin Enhanced |
| Product line | Atlas Vital |
| Model name | MKNSSDAV250 GB-D8 |
| Total capacity | 250 GB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 550 MB/s |
| Sequential write speed | Up to 530 MB/s |
| Random read (4K) | Up to 86,000 IOPS |
| Storage | |
| NAND flash type | MLC |
| Controller chip | SandForce |
| Ports & slots | |
| Interface type | SATA III |
| Size & build | |
| Form factor | M.2 2280 |
| Overall height | 3.5 mm |
| Overall width | 22 mm |
| Product depth | 80 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -40 °C to 85 °C |
| More details | |
| Mean time between failures | >1,500,000 h |
Yes, the drive uses the M.2 2280 form factor with a SATA III interface and is backwards-compatible with SATA 3.0 Gb/s slots, so it will work in any M.2 slot wired for SATA.
The drive uses high-reliability MLC NAND flash with built-in BCH ECC correcting up to 55 bits per 512 byte sector and an MTBF of 1,500,000 hours for long-term durability.
It is rated for 0 °C to 70 °C operating temperature and -40 °C to 85 °C storage temperature, with an integrated thermal sensor for monitoring heat.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?