Mushkin Enhanced MKNSSDEL256GB 256GB 2.5" SATA internal SSD
- 2.5 in (6.35 cm)
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 512 GB 2.5" SATA internal SSD with 3D NAND, up to 500 MBps read and 450 MBps write, low power draw and 1500G shock resistance
Capacity 512GB
The Mushkin Enhanced Element MKNSSDEL512GB is a 512GB internal SSD with a 2.5" form factor and a SATA III interface. It uses 3D NAND flash memory and a Silicon Motion controller for consumer desktop and laptop upgrades.
The drive supports user-upgradeable firmware and includes TRIM support when the operating system provides it. A temperature sensor and S.M.A.R.T. monitoring allow health tracking, while Device Sleep mode and Security Erase are available for power management and data sanitisation.
The 7.00mm height fits standard 2.5" drive bays and connects through a regular SATA data and power cable. Most problems arise when the host system lacks AHCI mode or when the operating system does not enable TRIM, which can reduce sustained write performance over time.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Mushkin Enhanced |
| Product line | Element |
| Model name | MKNSSDEL512 GB |
| Total capacity | 512 GB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 500 MB/s |
| Sequential write speed | Up to 450 MB/s |
| Storage | |
| NAND flash type | 3D NAND |
| Controller chip | Silicon Motion |
| Ports & slots | |
| Interface type | SATA III |
| Power | |
| Idle power draw | 0.08 W |
| Active power draw | 2 W |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Overall height | 7 mm |
| Overall width | 69.85 mm |
| Product depth | 100.45 mm |
| Product weight | 50g |
| Shipping weight | 0.08 kg |
| Package size | 196 × 104 × 13 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -40 °C to 85 °C |
| Max shock tolerance | 1500G |
| More details | |
| Seek time | <0.1 ms |
Other versions of this model
The 3D TLC NAND uses data shaping and SLC caching to extend write endurance, and S.M.A.R.T. monitoring lets you track remaining life so you can plan a swap before the flash wears out.
Sustained writes at the 450 MBps sequential rate will fill the SLC cache, after which the controller throttles to the native TLC speed to protect the 3D NAND from overheating.
Active power peaks at 2W while idle drops to 0.08W, and the drive is rated to operate continuously between 0°C and 70°C without a fan.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?