XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
2.5" SATA internal SSD with 480 GB capacity, 3D MLC flash and up to 565 MB/s read and 500 MB/s write speeds
The Mushkin Enhanced Reactor Armor3D is a 2.5-inch internal solid-state drive with 480 GB of capacity. It connects through a SATA III interface and uses 3D MLC flash memory paired with a Silicon Motion SM2258 controller. Sequential reads reach up to 565 MBps and writes up to 500 MBps.
This drive suits users upgrading a laptop or desktop that accepts a 2.5-inch SATA device and wants faster boot and application loading than a mechanical disk. It delivers up to 80,000 IOPS for random 4 KB reads and writes. Systems requiring a PCIe or M.2 form factor cannot use this 2.5-inch SATA unit.
The SATA III interface and 2.5-inch form factor are the single details that determine compatibility. Verify the host has a free 2.5-inch bay and a SATA 6 Gbps port before purchase.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Mushkin Enhanced |
| Product line | Reactor Armor3D |
| Model name | MKNSSDRE480 GB-3D |
| Total capacity | 480 GB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 565 MB/s |
| Sequential write speed | Up to 500 MB/s |
| Random read (4K) | Up to 80,000 IOPS |
| Random write (4K) | Up to 80,000 IOPS |
| Storage | |
| NAND flash type | 3D MLC |
| Controller chip | Silicon Motion SM2258 |
| Ports & slots | |
| Interface type | SATA III |
| Power | |
| Idle power draw | 0.09 W |
| Active power draw | 2.1 W |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Overall height | 7 mm |
| Overall width | 69.85 mm |
| Product depth | 100 mm |
| Product weight | 54.43g |
| Shipping weight | 0.10 kg |
| Package size | 187 × 109 × 18 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -40 °C to 85 °C |
| Max shock tolerance | 1500G |
| Vibration tolerance | 2-500 Hz at 3.1G |
| More details | |
| Seek time | 0.1 ms |
| Mean time between failures | 1,500,000 h |
The drive uses a standard 2.5 inch form factor and requires a SATA data cable plus a SATA power connector from your power supply; it mounts in any 2.5 inch bay or bracket with the usual four screw holes.
Connect the SATA data cable to a SATA III port on the motherboard and attach the SATA power lead; the step many forget is enabling AHCI mode in the BIOS before cloning or installing the operating system.
The 3D MLC flash and Silicon Motion SM2258 controller include internal flash RAID, LDPC ECC and StaticDataRefresh to protect data integrity; with a 1,500,000 hour MTBF the drive is rated for long-term use without scheduled maintenance.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?