We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black panel-mount USB outlets with cables, 12V, 90W total

Mydours

Mydours 2 Pack 90W 12V USB Outlet Panel Mount Dual 36W PD QC3.0 18W with Dual 65W USB C Cable

SKU CH-MZZD-XPP51

Two 12 V panel-mount sockets deliver up to 36 W per PD port and 18 W QC 3.0, reaching 90 W total across three devices, and include dual 65 W USB-C cables

  • Product typeAutomobile Charger
  • Fast 36W PD charging per port powers iPhone 15 in 35 minutes
  • 90W total output charges three devices at once without speed loss
  • Dual 65W USB-C cables deliver full power to laptops and phones
  • Anti-slip waterproof switch prevents accidental drain when vehicle is off
  • Simple surface mount needs only a small hole and screw terminals

Dual 36W PD ports and 18W QC3.0

This 12V panel-mount USB outlet delivers up to 36W per USB-C PD port and 18W via QC3.0. The two-pack kit includes dual 65W USB-C cables and supports simultaneous charging of three devices at a combined 90W. It is suited for car, bus, RV or truck installations where multiple phones, tablets or laptops need fast charging from a single 12V supply.

Sustained 90W output with non-slip switch

The unit maintains its full 90W total across all ports during extended use without throttling. A waterproof, dustproof switch stays off by default and must be pressed again after the vehicle is turned off, preventing parasitic drain. The 20AWG wiring handles the continuous current required for simultaneous high-wattage charging of phones, tablets and compatible laptops.

Check 12V supply and panel cut-out space

Verify that your vehicle provides a stable 12V source and that you can route red to positive and black to negative terminals. The surface-mount design needs only a small hole for the wiring, but confirm the mounting surface is flat and accessible. Ensure connected devices accept 36W PD or 18W QC3.0 input to utilise the rated speeds.

Specifications

Product
Product typeAutomobile Charger

Questions about this item

How much heat does the 90W panel produce when charging three devices all day?

The unit delivers up to 90W total across three ports with each PD port rated at 36W, so sustained full-load operation will generate noticeable warmth; ensure the mounting surface allows airflow around the housing.

What wiring and switch access must already exist in the vehicle for this 12V outlet to function?

You need a 12V DC supply with a 20AWG red wire to positive and black wire to negative, plus a flat panel cut-out for the surface mount and reachable access to the non-slip waterproof switch.

Will the 65W USB-C cables work properly with older 18W QC3.0 phones and 10W tablets?

Yes, each PD port negotiates down to 18W QC3.0 or 10W as needed, so legacy phones and tablets charge at their maximum supported rate while the 65W cables simply carry the negotiated current.

More in Wall Outlets & USB Receptacles

Similar items