NALYD 2.5" SATA SSD PCI Bracket 1-3 Drives
A PCI-slot bracket that holds one to three 2.5-inch SATA SSDs, adding storage capacity without using drive bays and supporting 750 MB/s transfer speeds
- Product typeStorage Sheds
- Adds 1-3 2.5" SATA drives via unused PCI slot
- SATA III cable supports up to 750 MB/s throughput
- Fits full-height and half-height chassis brackets
- Frees internal drive bays for better cable routing
- 100% brand-new bracket built for DIY storage expansion
PCI SATA Bracket for 2.5" Drives
This bracket mounts one to three 2.5 inch SATA SSDs into a standard PCI expansion slot. It is built for desktop and HIPC users whose chassis lack dedicated 2.5 inch drive bays. The assembly uses the otherwise unused PCI opening to add storage capacity without modifying the case.
Sustained Transfer via SATA III
The included cables support third generation SATA with a theoretical maximum bandwidth of 750 MB per second. High quality connectors maintain consistent throughput during extended read or write sessions. Backward compatibility ensures operation with older SATA revisions at their native speeds.
Check Slot Clearance and Drive Count
Verify that a full height or half height PCI slot is physically free and not blocked by other expansion cards. Confirm the power supply has enough spare SATA power connectors for the number of drives you plan to install. Ensure the operating system can recognise the additional SATA devices.
How it compares
Measured against everything we stock in Storage Sheds & Outdoor Buildings, at today’s prices. Recalculated every night.
- Price $34.99
- Cheaper than about 83% of the 219 comparable items (median $76.99).
Specifications
| Product | |
|---|---|
| Product type | Storage Sheds |
Questions about this item
How much power does the bracket draw when three 2.5" SATA drives run all day?
The bracket itself is passive and draws no power; each drive uses its own SATA power connector from your PSU, so total draw depends on the drives you install.
What must my motherboard provide for this bracket to work?
A free PCI expansion slot and standard SATA data cables from the board to the bracket; power comes from the PSU via SATA power leads.
Will my older SATA II drives work at full speed in this bracket?
Yes, the included SATA III cables are backward compatible, so SATA II drives operate at their native 3 Gb/s rate without any configuration.
More in Storage Sheds & Outdoor Buildings
Similar items
Flowerhouse White Bracket outdoor storage building 14.33in W 12.83in H 9.06in D
- Plastic
- Outhouse, water res…
Camping Mosquito Net for Cot Shelter Bugnet Screen Room 120cm 80cm 1600 holes 0.35kg
- Patio Covers
- 14.33 in W × 12.83…
Flowerhouse White Bracket Sand Bags 4-Pack 112 LBS
- Plastic
- Outdoor Activities,…





