NEMIX RAM 1TB 8x128GB DDR5 4800 CL40 1.1V 2Rx4 RDIMM Supermicro H13SSH memory upgrade
- 1 TB (8 × 128 GB)
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
1.1 TB DDR5-4800 ECC registered kit in twelve 96 GB modules for Supermicro H14DSG-O-CPU
Size 1.1TB 12X96GB
This 1.1TB kit contains twelve 96GB DDR5-4800 registered ECC modules built for the Supermicro H14DSG-O-CPU motherboard. Each 288-pin RDIMM runs at 1.10V with CL40 latency and a 2Rx4 organisation. The registered design lets every slot stay populated while the memory controller stays stable.
DDR5-4800 sets the peak transfer rate at PC5-38400, and the registered buffer adds one cycle of latency versus unbuffered modules. ECC corrects single-bit errors on the fly but cannot fix multi-bit failures. The 288-pin RDIMM form factor fits only boards wired for registered DDR5; it will not seat in UDIMM or SODIMM slots.
Fully populating all twelve slots delivers 1.1TB of addressable memory for large databases, virtualisation hosts or HPC jobs that exceed smaller configurations. Workloads needing more capacity than 1.1TB or speeds above DDR5-4800 will require a different platform or memory generation.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | NEMIX RAM Original Series Server Memory |
| Model name | DDR5 ECC RDIMM Registered Server Memory |
| Part number | MR38400-9624K12 |
| Total capacity | 1.1 TB (12 × 96 GB) |
| Product type | 288-Pin DDR5 RDIMM |
| Performance | |
| Rated speed | DDR5 4800 (PC5 38400) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL40 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.1 V |
| Compatibility | |
| Compatible systems | Supermicro |
| In the box | |
| Included items | 1.1 TB 12 × 96 GB DDR5 4800 MHz PC5-38400 2Rx4 1.1 V 288-PIN ECC RDIMM KIT |
Other versions of this model
The kit provides 12 x 96GB modules for a total of 1.1TB. Use it when your board's population rules call for fully populated channels at this density; otherwise select a lower-capacity kit that matches the approved DIMM layout in your manual.
The modules run at 4800 MT/s with CL40 latency at 1.10V, giving the memory controller the exact timing and voltage it expects for stable operation at the rated speed across all 12 slots.
The 288-pin Registered DIMM form factor is required by the H14DSG-O-CPU; the registered architecture buffers address and command signals so every slot can run fully populated at 96GB per module without overloading the controller.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?