We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 1.5TB DDR5 4800 CL40 16x96GB RDIMM ECC Registered memory upgrade for Supermicro H13DSG-OM

SKU CH-GFKE-8ZMX6

1.5 TB DDR5 kit with sixteen 96 GB registered ECC modules at 4800 MHz CL40 1.1 V for Supermicro H13DSG-OM

  • Total capacity1.5 TB (16 × 96 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 5 TB total capacity from sixteen 96 GB modules for maximum server density
  • DDR5-4800 (PC5-38400) speed with CL40 latency runs at rated frequency
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operating voltage matches platform requirements exactly
  • 288-pin RDIMM form factor verified for Supermicro H13DSG-OM motherboard

1.5TB DDR5-4800 RDIMM kit for Supermicro H13DSG-OM

This 1.5TB kit contains 16 modules of 96GB each, built as 2Rx4 Registered ECC DDR5 RDIMMs. It is designed for the Supermicro H13DSG-OM motherboard, delivering the exact rank, voltage and timing the platform expects for full-capacity operation at rated speed.

288-pin Registered form factor with ECC

The 288-pin RDIMM modules fit the board's memory slots and use registered architecture to offload the memory controller when every slot is populated. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production environments.

1.1V operation at CL40 latency

Running at 1.10V, the kit operates at the standard DDR5-4800 voltage with CL40 timings. Registered buffering maintains signal integrity across all 16 modules at full capacity, supporting stable throughput under sustained server workloads.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $43,540.99
Pricier than about 95% of the 21,161 comparable items (median $397.99).
Total capacity 1.5 TB (16 × 96 GB)
Higher than about 97% of the 20,941 comparable items (median 32 GB).
Price per GB $29.03 per GB
Pricier than about 82% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-9624K16
Total capacity1.5 TB (16 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items1.5 TB 16 × 96 GB DDR5 4800 MHz PC5-38400 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

What DDR5 speed and PC5 rating does this 1.5 TB kit run at?

The kit operates at DDR5 4800 with a PC5 38400 data rate, matching the Supermicro H13DSG-OM memory controller specification.

What physical form factor and pin count must the motherboard slots accept?

Each module is a 288-pin RDIMM, the registered DIMM form factor required by the H13DSG-OM; UDIMM or SODIMM slots will not fit.

In what order should the 16 modules be populated to avoid a no-post condition?

Follow the H13DSG-OM manual's DIMM population sequence exactly; installing all 16 x 96 GB modules in the wrong channel order is the most common cause of boot failure.

More in Model-Specific Memory Upgrades

Similar items