We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 UDIMM modules in static bag

NEMIX RAM

NEMIX RAM 128GB (4 x 32GB) DDR5 5600MHz CL46 1.1V 2Rx8 288-Pin Non-ECC UDIMM Kit for Supermicro X13SAE-F

SKU CH-8R06-6F9DF

A 128 GB kit of four 32 GB DDR5 modules running at 5600 MHz with CL46 latency and 1.1 V operation, validated for the Supermicro X13SAE-F motherboard

  • Total capacity128 GB (4 × 32 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 128GB 4X32GB

  • 128 GB total capacity from four 32 GB modules for heavy multitasking
  • DDR5 5600 MT/s speed rated at PC5-44800 for fast data throughput
  • CL46 latency at 1.10 V for stable low-voltage operation
  • 2Rx8 dual-rank unbuffered UDIMM design matches Supermicro X13SAE-F memory-controller requirements
  • Built with major OEM Samsung, Micron or Hynix chips and tested for reliability

NEMIX RAM 128GB DDR5 Kit for Supermicro X13SAE-F

This 128GB kit contains four 32GB DDR5 5600MHz modules built for the Supermicro X13SAE-F motherboard. Each stick runs at 1.1V with CL46 latency in a 2Rx8 unbuffered UDIMM layout. The 288-pin DIMMs use major OEM chips from Samsung, Micron, or Hynix and ship without heat spreaders.

Suits builders filling all four slots

Buyers who need ECC error correction or registered modules should look elsewhere, as this kit is non-ECC and unbuffered. Systems limited to lower memory speeds or different voltage requirements will not match the rated 5600MHz CL46 specification. Anyone needing a smaller capacity upgrade should consider a different kit.

Simple installation with standard UDIMM alignment

The 288-pin modules insert directly into the motherboard DIMM slots following the board's population order. Most issues arise when the BIOS is not updated to support the full 128GB capacity or when modules are placed in the wrong slot sequence. Verify the manual for approved DIMM population rules before fitting the kit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,025.99
Pricier than about 68% of the 21,161 comparable items (median $397.99).
Total capacity 128 GB (4 × 32 GB)
Higher than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $15.83 per GB
Pricier than about 62% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-328K4
Total capacity128 GB (4 × 32 GB)
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items128 GB 4 × 32 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does my motherboard need four DDR5 UDIMM slots to install this 128GB kit?

Yes, the kit contains four 32GB modules, so the board must provide four 288-pin DDR5 UDIMM slots to use the full 128GB capacity.

Can I keep my existing DDR5 modules and add this kit to reach a higher total?

Only if the board supports mixing 2Rx8 CL46 1.10V modules with your current memory; the manual will confirm approved population rules and maximum capacity.

How do I verify the kit is running at DDR5 5600 CL46 after installation?

Check the memory speed and timings in the BIOS or a system-information tool — they should show 5600 MT/s and CL46 at 1.10V.

More in Model-Specific Memory Upgrades

Similar items