We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 UDIMM sticks with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR5 5600 ECC UDIMM for Supermicro X14SAE-F memory upgrade

SKU CH-7EDP-78DVJ

128 GB kit of four 32 GB DDR5 5600 ECC UDIMM modules at CL46 and 1.1 V for the Supermicro X14SAE-F

  • Total capacity128 GB (4 × 32 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 128GB 4X32GB

  • 128 GB capacity across four 32 GB modules for maximum system memory
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth for the platform
  • ECC protection detects and corrects single-bit errors to prevent data corruption
  • 1 V operation matches the motherboard's memory-controller specification exactly
  • 288-pin unbuffered UDIMM form factor fits the Supermicro X14SAE-F board requirements

128GB DDR5 ECC UDIMM kit

This NEMIX RAM kit provides 128GB of DDR5 5600 memory in four 32GB unbuffered ECC UDIMMs. It is built for the Supermicro X14SAE-F motherboard and uses 2Rx8 chips running at 1.1V with CL46 latency.

Exact-match replacement for slower DDR5

The kit matches the board's required 288-pin UDIMM form factor, voltage and rank layout so the memory controller recognises full capacity at rated speed. Upgrading is worth it when your current modules limit capacity or run below 5600 MT/s.

Suits Supermicro X14SAE-F builders needing ECC

Buyers who need registered DIMMs, SODIMMs or non-ECC memory should look elsewhere. The kit also does not fit platforms that require a different pin count, voltage or DDR generation.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,691.99
Pricier than about 72% of the 21,161 comparable items (median $397.99).
Total capacity 128 GB (4 × 32 GB)
Higher than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $21.03 per GB
Pricier than about 66% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 ECC Unbuffered UDIMM Memory
Part numberME44800-328K4
Total capacity128 GB (4 × 32 GB)
Product type288-Pin DDR5 ECC UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items128 GB 4 × 32 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will these 288-pin DDR5 modules fit the Supermicro X14SAE-F motherboard?

Yes, the kit is built as 288-pin DDR5 ECC UDIMM modules, which is the exact form factor the X14SAE-F requires.

What is the correct installation order for the four 32GB sticks?

Populate the slots in the sequence shown in the X14SAE-F manual; the board expects a specific population order for 2Rx8 modules to run at 5600MHz.

Do the modules need active cooling or heat-spreader maintenance later?

No heat spreader is fitted, so only ensure case airflow keeps the bare DRAM within its 1.10V operating envelope; no periodic maintenance is required.

More in Model-Specific Memory Upgrades

Similar items