We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 UDIMM sticks without heat spreaders

NEMIX RAM

NEMIX RAM MD44800-4828K4 192GB (4x48GB) DDR5 5600 CL46 1.1V 2Rx8 UDIMM memory upgrade

SKU CH-FNVV-ZKVQT

192 GB DDR5 kit with four 48 GB unbuffered UDIMMs at 5600 MT/s CL46 and 1.1 V for MSI B650M Project Zero

  • Total capacity192 GB (4 × 48 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Buffer typeUnbuffered
  • Rated voltage1.1 V

Capacity 192GB 4X48GB

  • 192 GB total capacity from four 48 GB modules
  • DDR5 5600 MT/s speed rated as PC5-44800
  • Low 1.10 V operating voltage for efficient power use
  • CL46 CAS latency with 2Rx8 dual-rank organisation
  • 288-pin UDIMM form factor built for MSI B650M Project Zero compatibility

NEMIX RAM 192GB DDR5 5600 Kit

This NEMIX RAM kit delivers 192 GB across four 48 GB DDR5 UDIMM modules. Rated at 5600 MT/s with CL46 latency and 1.1 V operation, the unbuffered non-ECC DIMMs target desktop systems that accept 288-pin DDR5 memory. The kit is validated for MSI B650M Project Zero motherboards.

Suits high-capacity DDR5 builds.

Builders who need maximum density on a consumer DDR5 platform will match this 4 x 48 GB configuration. Systems requiring ECC error correction or registered signal buffering cannot use these unbuffered non-ECC modules. Buyers with boards limited to lower total capacity or fewer slots should verify support before purchase.

48 GB per module density decides fit

Each stick provides 48 GB in a 2Rx8 organisation, so the motherboard must support 48 GB single-rank-equivalent density per slot. If the platform caps per-slot capacity below this figure, the kit will not function. Confirm the board's maximum module size before ordering.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,696.99
Pricier than about 72% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (4 × 48 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $14.05 per GB
Pricier than about 60% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineMSI Gaming Motherboard Compatible Series Memory
Model nameMSI DDR5 5600 MHz Non-ECC Unbuffered UDIMM
Part numberMD44800-4828K4
Total capacity192 GB (4 × 48 GB)
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsMSI
In the box
Included items192 GB (4 × 48 GB) DDR5 5600 MHz PC5-44800 2Rx8 1.1 V CL46 288-PIN Non-ECC Unbuffered UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does this 288-pin DDR5 UDIMM kit fit the four DIMM slots on an MSI B650M Project Zero motherboard?

Yes, the kit is validated for the MSI B650M Project Zero and uses the standard 288-pin DDR5 UDIMM form factor that matches the board's four memory slots.

What is the correct way to seat the four 48 GB modules so the board trains at DDR5 5600 CL46?

Install one module in each of the four slots, press straight down until the retention clips click on both ends, then power on and let the BIOS complete memory training before enabling XMP or EXPO.

Will the Samsung, Micron or Hynix DRAM chips on these modules need any firmware updates or active cooling over time?

No firmware updates are required for the DRAM; the modules run at 1.1 V without a heat spreader, so ensure the case provides adequate airflow over the DIMM area for long-term stability.

More in Model-Specific Memory Upgrades

Similar items