We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 128GB DDR5-6400 2Rx4 ECC RDIMM Kit 2x64GB Supermicro H14SSL-N

SKU CH-082C-NP286

128 GB DDR5-6400 ECC registered RDIMM kit (2 × 64 GB, CL52, 1.1 V) validated for the Supermicro H14SSL-N motherboard

  • Total capacity128 GB (2 × 64 GB)
  • Rated speedDDR5 6400 (PC5 51200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL52
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • Exact-match DDR5-6400 kit installs at rated speed without tuning
  • 128 GB capacity across two 64 GB modules fills both channels fully
  • Registered ECC RDIMM corrects single-bit errors and stabilises heavy loads
  • 1 V operation matches the Supermicro H14SSL-N memory controller spec
  • 2Rx4 dual-rank organisation enables full population at maximum density

Exact-match DDR5-6400 server kit

This NEMIX RAM kit delivers 128 GB as two 64 GB DDR5-6400 Registered ECC RDIMMs built for the Supermicro H14SSL-N motherboard. The modules run at 1.1 V with CL52 latency and a 2Rx4 organisation, matching the board's memory controller requirements for full-capacity recognition at rated speed.

DDR5 RDIMM population constraints

Registered (buffered) architecture offloads the memory controller so every slot can run fully populated at full capacity, while ECC corrects single-bit errors on the fly to prevent silent data corruption. Server and motherboard memory support varies by model, so the system manual must be consulted for supported capacities, approved DIMM population order and installation steps before purchase.

2Rx4 rank and 1.1 V specification

The 2Rx4 rank structure and 1.1 V operating voltage are the decisive parameters that determine whether this kit will be recognised at its full 128 GB capacity and run at DDR5-6400 on the target platform. Buyers who need a different rank configuration or voltage level must select an alternative part.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $4,303.99
Pricier than about 78% of the 21,161 comparable items (median $397.99).
Total capacity 128 GB (2 × 64 GB)
Higher than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $33.62 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR51200-924K2
Total capacity128 GB (2 × 64 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 6400 (PC5 51200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL52
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items128 GB 2 × 64 GB DDR5 6400 MHz PC5-51200 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Should I pick the 2x64 GB kit or look for a single 128 GB module for the Supermicro H14SSL-N?

The board uses 288-pin RDIMM slots and the kit provides two 64 GB modules; a single 128 GB RDIMM is not offered in this lineup.

Will the DDR5-6400 rating actually run at 6400 MT/s once installed in the H14SSL-N?

The modules are spec-matched to the motherboard's memory controller, so the system recognises the full 128 GB and operates at the rated 6400 speed.

Does the PC5-51200 label limit the bandwidth I can use on this server?

PC5-51200 is the peak transfer rate for DDR5-6400; the registered ECC design lets every populated slot sustain that bandwidth.

More in Model-Specific Memory Upgrades

Similar items