We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules without heat spreaders, 288-pin, 192GB kit

NEMIX RAM

NEMIX RAM 192GB (4x48GB) DDR5 5600MHz CL46 ECC Registered RDIMM memory upgrade for GIGABYTE MA34-CP0

SKU CH-R9QE-ACAA1

A 192 GB DDR5 kit of four 48 GB registered ECC RDIMMs at 5600 MHz CL46 and 1.1 V, validated for the GIGABYTE MA34-CP0 motherboard

  • Total capacity192 GB (4 × 48 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 192GB 4X48GB

Show 24 more
  • 192 GB total capacity from four 48 GB modules
  • DDR5 5600 MHz speed rated at PC5-44800 bandwidth
  • ECC Registered RDIMM design prevents silent data corruption
  • 1 V operating voltage with CL46 latency timing
  • Verified compatibility with GIGABYTE MA34-CP0 motherboard

Exact-match upgrade for GIGABYTE MA34-CP0

This 192GB kit delivers four 48GB DDR5 5600MHz modules built to the board's native PC5-44800 specification. Registered ECC RDIMMs with 2Rx8 organisation and CL46 timing let the memory controller recognise full capacity at rated speed. It targets administrators who need maximum supported density in a single validated package.

DDR5 RDIMM registered architecture limits

Registered buffering offloads the memory controller so every slot can run fully populated at full capacity. ECC corrects single-bit errors on the fly to prevent silent data corruption and unplanned reboots. The 288-pin RDIMM form factor is mandatory for this motherboard; UDIMM or SODIMM modules will not fit or function.

Enterprise build without heat spreaders

Modules use major OEM Samsung, Micron or Hynix chips at 1.1V and ship as a matched 4x48GB kit. The bare-DIMM design fits dense server chassis where tall spreaders would block airflow or adjacent slots. Installers must follow the motherboard manual for approved population order and capacity limits before seating all four modules.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $4,278.99
Pricier than about 77% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (4 × 48 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $22.29 per GB
Pricier than about 67% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-4828K4
Total capacity192 GB (4 × 48 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items192 GB 4 × 48 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Should I choose the 192GB kit or a smaller capacity for my GIGABYTE MA34-CP0?

The 192GB kit provides four 48GB modules that fill all slots at the board's rated 5600MHz speed; choose it if your workload needs maximum capacity, otherwise select a smaller kit that still uses 48GB 2Rx8 RDIMMs to keep population rules consistent.

What does the 5600MHz rating deliver once the modules are installed in the server?

The memory controller runs the kit at DDR5-5600 (PC5-44800) with CL46 latency and 1.1V, giving the full rated bandwidth the board expects when all four registered DIMMs are populated.

How does the 288-pin RDIMM interface affect what I can install?

The motherboard requires 288-pin registered ECC RDIMMs; this kit matches that exact form factor and electrical spec, so it will be recognised at full capacity without mixing UDIMM or SODIMM types.

More in Model-Specific Memory Upgrades

Similar items