We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green SODIMM modules with black chips and gold contacts

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR3 1333 PC3-10600 204-Pin SODIMM POSIFLEX XT-5315 memory upgrade

SKU CH-NBYB-0QYFF

A 16 GB DDR3 1333 SODIMM kit built for POSIFLEX XT-5315 point-of-sale terminals

  • Total capacity16 GB (2 × 8 GB)
  • Rated speedDDR3 1333 (PC3 10600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL9
  • Buffer typeUnbuffered
  • Rated voltage1.5 V
  • 16 GB kit (2 x 8 GB) for POS terminals
  • DDR3 1333 MHz PC3-10600 speed rating
  • 204-pin SODIMM fits POSIFLEX XT-5315
  • CL9 latency with 1.50 V operation
  • Major OEM chips tested under load

POSIFLEX XT-5315 DDR3 SODIMM Kit

This 16GB kit contains two 8GB DDR3 1333 PC3-10600 SODIMM modules built for the POSIFLEX XT-5315 JIVA foldable 15-inch terminal. Each stick runs at 1.35V with CL9 latency and uses a 2Rx8 organisation. The unbuffered non-ECC design matches the original system specification.

POS Terminal Upgrade Buyers

The kit suits technicians maintaining or upgrading the named POSIFLEX terminal where 204-pin DDR3 SODIMM slots are present. It will not fit systems that require registered or ECC modules, nor boards limited to a single rank per channel. Buyers needing higher capacities per slot or a different voltage should verify their motherboard documentation first.

204-Pin DDR3 1333 Compatibility

The decisive specification is the 204-pin DDR3 SODIMM form factor operating at 1333 MT/s with 1.35V supply. Only systems that accept this exact pin count, voltage and speed will recognise both 8GB modules without configuration changes.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $30.99
Cheaper than about 85% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB (2 × 8 GB)
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $1.94 per GB
Cheaper than about 94% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR3 1333 MHz Non-ECC Unbuffered SODIMM
Part numberMS10600-828K2
Total capacity16 GB (2 × 8 GB)
Product type204-Pin DDR3 SODIMM
Performance
Rated speedDDR3 1333 (PC3 10600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL9
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.5 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items16 GB (2 × 8 GB) DDR3 1333 MHz PC3-10600 2Rx8 1.35 V 204-PIN Non-ECC Unbuffered SODIMM KIT

Questions about this item

How much heat and power does the 1.35 V DDR3 1333 kit draw when the POS terminal runs continuously?

Each module operates at 1.35 V with no heat spreader, so power draw stays low and passive cooling inside the XT-5315 chassis is sufficient for all-day operation.

What must the POSIFLEX XT-5315 already have for this 204-pin SODIMM kit to work?

The terminal needs two free DDR3 SODIMM slots that accept 2Rx8 unbuffered non-ECC modules at PC3-10600 speed.

Will the CL9 16 GB kit run stably alongside any original 4 GB or 8 GB sticks I keep in the JIVA terminal?

Yes, the memory will down-clock to match the slowest installed module and the XT-5315 chipset handles mixed densities without errors.

More in Model-Specific Memory Upgrades

Similar items