We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 260-Pin SODIMM POSIFLEX JK-3250 memory upgrade

SKU CH-0YQC-DD6C9

16 GB DDR4 3200 SODIMM for POSIFLEX JK-3250 kiosks, CL22 2Rx8 1.2 V unbuffered non-ECC

  • Total capacity16 GB
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeUnbuffered
  • Rated voltage1.2 V
  • 16 GB DDR4 3200 MHz boosts kiosk responsiveness
  • CL22 latency at 1.20 V keeps power draw low
  • 2Rx8 dual-rank layout maximises memory density
  • 260-pin SODIMM fits POSIFLEX JK-3250 Cachet Series
  • Tested with Samsung Micron Hynix chips for stability

POSIFLEX JK-3250 kiosk upgrade

This 16 GB DDR4 SODIMM is built for the POSIFLEX JK-3250 Cachet Series point-of-sale terminal. It targets IT teams maintaining kiosk fleets who need a validated, single-module memory increase without opening a full workstation chassis.

Unbuffered SODIMM with major-brand DRAM

The stick uses Samsung, Micron or Hynix chips on a standard 260-pin green PCB without a heat spreader, keeping height low for tight kiosk enclosures. Unbuffered, non-ECC operation matches the platform's consumer-class memory controller, and the 1.2 V rating means no extra voltage configuration in BIOS.

3200 MT/s CL22 2Rx8 density

Rated at PC4-25600 with CAS 22, the dual-rank 2Rx8 organisation delivers the bandwidth the JK-3250 expects from a single 16 GB module. Systems requiring ECC, registered signalling or speeds beyond 3200 MT/s cannot use this part.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $76.99
Cheaper than about 71% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $4.81 per GB
Cheaper than about 79% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR4 3200 MHz Non-ECC Unbuffered SODIMM
Part numberMS25600-628K1
Total capacity16 GB
Product type260-Pin DDR4 SODIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items16 GB (1 × 16 GB) DDR4 3200 MHz PC4-25600 2Rx8 1.2 V CL22 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Does the DDR4 3200 (PC4-25600) interface run at 3200 MT/s or drop to a lower speed in the POSIFLEX JK-3250?

The module is rated DDR4 3200 (PC4-25600); the JK-3250 memory controller will set the final speed, often 3200 MT/s if the BIOS supports it.

Will this 260-pin SODIMM fit the POSIFLEX JK-3250 Cachet Series kiosk slot?

Yes, it is a 260-pin DDR4 SODIMM built to the POSIFLEX POS series form factor for the JK-3250.

How do I install the module and what step is commonly missed?

Power off, open the kiosk chassis, align the notch on the 260-pin edge, press firmly until both side clips click, then verify 16 GB appears in BIOS.

More in Model-Specific Memory Upgrades

Similar items